DCP-T510W
 |
常见问题解答与故障排除 |
Reset the Network Settings to Factory Default
You can use your machine's control panel to reset the print server to its default factory settings. This resets all information, such as the password and IP address.
- IMPORTANT
- (MFC-T810W/MFC-T910DW)
When you reset the machine, your faxes that are stored in the machine's memory may be deleted. Before you reset the machine, you can transfer your faxes to your computer or another fax machine so you will not lose any important messages.
- This feature restores all wired (supported models only) and wireless network settings to the factory settings.
- You can also reset the print server to its factory default settings using BRAdmin Light or BRAdmin Professional.
DCP-T510W/DCP-T710W/MFC-T810W
- Press Menu.
- Press
or 
to select the following: - Select [Initial Setup]. Press OK.
- Select [Reset]. Press OK.
- Select [Network Reset]. Press OK.
- Press for [Reset] to confirm.
- Press for [Yes] to reboot the machine. The machine restarts.
MFC-T910DW
- Press Settings.
- Press or to select the following:
- Select [Network]. Press OK.
- Select [Network Reset]. Press OK.
- Press
for two seconds to confirm. The machine restarts.
内容反馈
请在下方提供您的反馈，帮助我们改进支持服务。
