DCP-T510W
![]() |
常见问题解答与故障排除 |
![](/g/b/img/product/dcpt510w_all.jpg)
DCP-T510W
日期: 2018-04-26 ID: faq00000105_511
Reset the Network Settings to Factory Default
You can use your machine's control panel to reset the print server to its default factory settings. This resets all information, such as the password and IP address.
- IMPORTANT
- (MFC-T810W/MFC-T910DW)
When you reset the machine, your faxes that are stored in the machine's memory may be deleted. Before you reset the machine, you can transfer your faxes to your computer or another fax machine so you will not lose any important messages.
![](/g/b/img/faqend/faq00000105_511/cn_ot/en/1890140/topic1_icon5.png)
- This feature restores all wired (supported models only) and wireless network settings to the factory settings.
- You can also reset the print server to its factory default settings using BRAdmin Light or BRAdmin Professional.
DCP-T510W/DCP-T710W/MFC-T810W
- Press Menu.
- Press
or
to select the following:
- Select [Initial Setup]. Press OK.
- Select [Reset]. Press OK.
- Select [Network Reset]. Press OK.
- Press
for [Reset] to confirm.
- Press
for [Yes] to reboot the machine.
The machine restarts.
MFC-T910DW
- Press Settings.
- Press
or
to select the following:
- Select [Network]. Press OK.
- Select [Network Reset]. Press OK.
- Press
for two seconds to confirm.
The machine restarts.
DCP-T510W, DCP-T710W, MFC-T810W, MFC-T910DW
如果需要更多的帮助,请联系 Brother 客户服务中心:
内容反馈
请在下方提供您的反馈,帮助我们改进支持服务。