Follow the steps below to set the Auto Power Off time.

1. Press  to turn the machine on.
2. Press  and  buttons simultaneously.
   The error LED starts blinking.

   Move to the next step within one minute, or the scanner will return to standby mode.

3. Press  three times.
   All LEDs turn on and then quickly turn off.
4. Press  the number of times required for the Auto Power Off setting you want. (See the table below).

   Make sure you select the setting within four seconds, or the scanner will return to standby mode.

   Number of button presses	Auto Power Off settings
   1	Off
   2	20 minutes
   3	1 hour
   4	2 hours
   5	4 hours
   6	8 hours

   
   All LEDs will flash the number of times you press the  button.

   You can check the Auto Power Off time set on your scanner using Remote Setup via the Brother Utilities app on your computer or Web Based Management.
   If you use Remote Setup, download the latest Full Driver & Software Package and install it.

   > Click here to download latest Full Driver & Software Package in the Downloads section.