TD-4650TNWBR
|
FAQ & Fehlerbehebung |
How to reset the printer settings by directly operating the printer
Printer initialization clears the printer's DRAM and restores its factory settings.
-
Turn off the printer.
-
Press and hold the Feed/Pause button, and then turn on the printer.
-
Release the button after the LED flashes in amber five times and lights in green/red (blinks 5 times alternately).
The LED color will change as follows:
Amber (lit) > Red/Amber (blinks 5 times alternately) > Amber (5 times) > Green/Red (blinks 5 times alternately) (Release the button here) > Green (5 times) > Red (5 times) > Green (lit)
After the initialization, the following factory settings will be restored:
Parameter |
Default setting |
Speed |
76 mm/sec (3 ips) |
Density |
8 |
Label Width |
101.5 mm (4") |
Label Height |
101.5 mm (4") |
Sensor Type |
Gap sensor |
Gap Setting |
3 mm (0.12") |
Print Direction |
0 |
Reference Point |
0,0 (upper left corner) |
Offset |
0 |
Tear Mode |
On |
Label Peeler off Mode |
Off |
Cutter Mode |
Off |
Code Page |
850 |
Country Code |
001 |
Clear Flash Memory |
No |
< Printer initialization from the LCD >
You can also activate printer initialization from the LCD.
-
In the LCD, select the Menu icon .
-
In the Main menu, select Advanced.
-
Select Initialization.
Wenn Ihre Frage nicht beantwortet werden konnte, haben Sie andere FAQ geprüft?
Haben Sie in den Handbüchern nachgesehen?
Wenn Sie weitere Unterstützung benötigen, wenden Sie sich an den Brother-Kundendienst:
Relevante Modelle
TD-4650TNWB, TD-4650TNWBR, TD-4750TNWB, TD-4750TNWBR
Rückmeldung zum Inhalt
Helfen Sie uns dabei, unseren Support zu verbessern und geben Sie uns unten Ihre Rückmeldung.