This function allows you to create various labels using the built-in templates.

To use the Text Label function, follow the steps below:

Example:

(Template that includes one repeated graphic)

1. Press the [Menu] key.
    
2. Press the Cursor key (  ) to select [Decorative].
    
3. Press the [OK] key.
   [Select Category] is displayed.
    
4. Press the Cursor key to select [Text].
    
5. Press the [OK] key.
   [Select Design] is displayed.
    
6. Press the Cursor key (  ) until appears.
    
7. Press the [OK] key.
   [Input Text] is displayed.
    
8. Clear the text and then enter the text to be printed.
   • You cannot set the Font, Size, Style and Frame while entering texts.
   • To clear the text, move the cursor to the right side where you wish to clear, and then press the Backspace key (  /  ).
   • To clear all text, press the [Clear] key (  /  ). “All Clear” appears.
     Press the [OK] key to clear or the Escape key (  ) to cancel.
9. Press the [OK] key.
   [Set Label Length] is displayed.
    
10. Press the Cursor key or the number keys to select your desired label length from [Auto] or 30 – 999 mm (1.2″ - 39.0″).
    • Press the Space key to return to the initial setting for “Label Length” mode. The initial setting is [Auto].
    • If you set the longer label length than the default ([Auto]), the text label is printed repeatedly within the set length. The text label may not be fully printed depending on the set length.
    • The available label length setting changes depending on the number of texts you entered.
11. Press the [OK] key.
    [Print] is displayed.

    To preview labels, press the [Preview] key (  /  ) when [Print] is displayed on the LCD.

12. Press the [OK] key.
    [Copies:] is displayed.


13. Press the Cursor key or the number keys to specify the number of copies within the range of 1 – 9.
     
14. Press the [OK] key.