RJ-4040
FAQ & Fehlerbehebung |
Was bedeuten die Kontrollleuchten?
Die Anzeigen leuchten und blinken, um den Status des Druckers anzuzeigen. Die folgenden Symbole werden in dieser FAQ verwendet, um die Bedeutung der verschiedenen Farben und Muster der Anzeigen zu erklären.
oder oder oder
|
Die Anzeige leuchtet in der dargestellten Farbe |
oder oder oder
|
Anzeige blinkt in der angezeigten Farbe |
oder oder oder
|
Die Anzeige blinkt 1 oder 2 Mal in jeder Farbe und schaltet sich dann aus. |
Die Anzeige leuchtet oder blinkt in einer beliebigen Garbe oder einem beliebigen Muster. | |
Anzeige ist aus |
POWER | STATUS |
BATT (BATTERIE) |
Wi-Fi® | Beschreibung |
---|---|---|---|---|
Die Stromversorgung ist EIN | ||||
Rollenabdeckung geöffnet | ||||
Datenübertragung | ||||
Fehler Druckfehler Vorschubfehler Fehler beim Öffnen der Abdeckung Kommunikationsfehler Bildverarbeitungsfehler Fehler bei der Datenbank-Suche Kein Template-Fehler Fehler bei der Zugangspunkt-Suche Fehler bei der Verbindung zum Zugriffspunkt Sicherheitsfehler >> Beachten Sie "Stromzufuhr" für mehr Informationen. |
||||
Fehler Batterie Fehler Massenspeicher-Fehler |
||||
System Fehler | ||||
Das Gerät befindet sich im Boot Modus >> Beachten Sie "Stromzufuhr" für mehr Informationen. |
||||
(Einmal alle 3 Sekunden) |
Drahtlos ein, nicht angeschlossen (nur RJ-4040) | |||
Drahtlos oder Bluetooth eingeschaltet, verbunden | ||||
(Einmal alle 0,4 Sekunden) |
Jetzt WPS einstellen (nur RJ-4040) | |||
Wird initialisiert | ||||
Formatierung abgeschlossen (wenn [Daten nach dem Drucken drucken]auf [Löschen] gesetzt ist) | ||||
Jetzt abkühlen >> Beachten Sie "Stromzufuhr" für mehr Informationen. |
||||
MCR-Lesemodus | ||||
MCR lesen Erfolg | ||||
MCR-Lesefehler | ||||
(Einmal alle 4 Sekunden) |
Leistung der wiederaufladbaren Batterie: die Hälfte | |||
(Zweimal alle 4 Sekunden) |
Leistung der wiederaufladbaren Batterie: niedrig | |||
(Einmal alle 0,4 Sekunden) |
Die Batterie muss aufgeladen werden | |||
Lädt | ||||
Leistung der wiederaufladbaren Batterie: voll Aufladung abgeschlossen | ||||
Massenspeicher-Modus | ||||
Verarbeitung der Datei im Massenspeichermodus | ||||
Initialisieren |
Indikator-Warnungen
Die Stromanzeige leuchtet nicht.
Der Drucker wird nicht mit Strom versorgt.
Wenn Sie Wechsel- oder Gleichstrom verwenden, vergewissern Sie sich, dass das Netzteil oder der Autoadapter richtig angeschlossen ist, und stellen Sie sicher, dass die Wechsel- oder Gleichstromsteckdose eingeschaltet ist..
Wenn Sie Gleichstrom verwenden, überprüfen Sie die Sicherung.
Der Thermodruckkopf oder der Motor ist zu warm.
Kopf:
Wenn der Thermokopf noch heisser wird, kann der Thermokopf in Bereichen, die nicht für den Druck vorgesehen sind, Bilder auf dem Papier erzeugen. Dieser Zustand ist normal wenn Dokumente mit sehr viel "schwarzem" Inhalt gedruckt werden..
Der Drucker stoppt und setzt den Druckvorgang fort, nachdem sich der Druckkopf abgekühlt hat..
Um das eintreten dieser bedingung zu vermeiden oder zu verzögern, drucken Sie mit einer leichteren Dichteeinstellung, reduzieren Sie die Menge des zu druckenden Schwarzraums (z.B. Entfernen von Hintergrundschattierungen und Fabren in Grafiken und Präsentationsdokumenten), und stellen Sie sicher, dass der Drucker ausreichend belüftet ist und sich nicht in einem geschlossenen Raum befindet.
Motor:
Verwenden Sie den Drucker nicht ständig. Wenn der Drucker kontinuirlich verwendet wird, wird der Motor zu heiss. In diesem Fall stoppt der Drucker und setzt den Druckvorgang nach Abkühlung des Motors fort.
Dieser Zustand kann häufiger auftreten, wenn der Drucker in grosser Höhe (mehr als 10'000 Fuss) verwendet wird, da eine geringe Luftdichte zur Kühlung des Druckers zur Verfügung steht.
Bei instabiler Kommunikation werden Daten möglicherweise nicht korrekt empfangen. Versuchen Sie erneut eine Verbindung herzustellen, wenn sich die Kommunikationsbedingungen verbessert haben.
Der Drucker befindet sich im Boot-Modus.
Das Netzgerät wurde während der Aktualisierung der Firmware ausgesteckt, und der Drucker startete beim nächsten Start im Boot-Modus.
Wenn das Problem weiterhin auftritt, wenden Sie sich an den Brother-Kundendienst.