PDS-6000F
|
FAQ et Diagnostic |
My scanner is connected but it will not feed my document or do anything else.
Follow the steps below to resolve the issue:
-
Your document is not set correctly.
Insert your document until you feel the top edge of the document touch the inside of your scanner.
-
Your document is too thin or too thick.
Check that your document is acceptable.
> Click here to see detail of suitable document.
If your document is not the issue:
-
Confirm that the USB cable connecting your scanner to your computer is connected correctly.
-
Re-install the scanner driver from Brother's installation DVD-ROM.
-
Paper dust has accumulated on the surface of the rollers.
Clean the rollers.
> Click here to see how to clean the rollers.
-
Too many documents are loaded in the ADF at a time.
Make sure your document is acceptable for the machine.
> Click here to see detail of suitable document.
-
There are foreign objects in the ADF.
Remove any foreign objects or ripped paper from the ADF.
Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?
Avez-vous consulté les manuels?
Pour toute assistance supplémentaire, contactez le service clientèle de Brother:
Modèles apparentés
PDS-5000, PDS-5000F, PDS-6000, PDS-6000F
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.