DCP-310CN
 |
FAQ et Diagnostic |
How do I program the date and time?
To set the date and time, follow the instructions listed below:
-
Press the Menu/Set or Menu key on the Control Panel.
-
Press the up or down navigation key and select Initial Setup, then Date/Time.
-
The LCD screen will prompt you to enter the year. Enter the last two digits of the year (for example, enter 06 for 2006).
-
Press the Menu/Set or Menu key .
-
The screen will prompt you to enter the month. Enter the two digits for the month (for example, enter 09 for September).
-
Press the Menu/Set or Menu key .
-
The screen will prompt you to enter the day. Enter two digits for the day (for example, 06).
-
Press the Menu/Set or Menu key .
-
The screen will prompt you to enter the time. Enter the time in 24-hour format (for example, enter 15:00 for 3:00 pm).
-
Press the Menu/Set or Menu key .
-
Press the Stop/Exit key on the Control Panel.
The LCD will display the date and time whenever the unit is idle.
Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.
