DCP-310CN
![]() |
FAQ et Diagnostic |
![](/g/b/img/product/dcp310cn_eu.jpg)
DCP-310CN
Date: 07.09.2006 ID: faq00000299_001
How do I program the date and time?
To set the date and time, follow the instructions listed below:
-
Press the Menu/Set or Menu key on the Control Panel.
-
Press the up or down navigation key and select Initial Setup, then Date/Time.
-
The LCD screen will prompt you to enter the year. Enter the last two digits of the year (for example, enter 06 for 2006).
-
Press the Menu/Set or Menu key .
-
The screen will prompt you to enter the month. Enter the two digits for the month (for example, enter 09 for September).
-
Press the Menu/Set or Menu key .
-
The screen will prompt you to enter the day. Enter two digits for the day (for example, 06).
-
Press the Menu/Set or Menu key .
-
The screen will prompt you to enter the time. Enter the time in 24-hour format (for example, enter 15:00 for 3:00 pm).
-
Press the Menu/Set or Menu key .
-
Press the Stop/Exit key on the Control Panel.
The LCD will display the date and time whenever the unit is idle.
DCP-110C, DCP-310CN, FAX-1815C, FAX-1820C, FAX-1835C, FAX-1940CN, MFC-210C, MFC-215C, MFC-3220C, MFC-3240C, MFC-3420C, MFC-3820CN, MFC-410CN, MFC-425CN, MFC-5440CN, MFC-5840CN, MFC-620CN, MFC-640CW
Pour toute assistance supplémentaire, contactez le service clientèle de Brother:
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.
Étape 1: Comment qualifieriez-vous les informations figurant sur cette page?
Étape 2: Y a-t-il des commentaires que vous voudriez ajouter?
Ce formulaire a pour seul but de nous faire part de vos commentaires.