MFC-9330CDW
 |
Perguntas frequentes e Solução de problemas |
Jam Rear
If the machine's display shows the message Jam Rear, a paper jam occurred behind the back cover. Follow the steps below to clear the message Jam Rear.
NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.
- Leave the machine turned on for 10 minutes for the internal fan to cool the extremely hot parts inside the machine.
- Open the back cover.
- Pull the green tabs at the left and right sides toward you to release the fuser cover (1).
- Use both hands to gently pull the jammed paper out of the fuser unit.
- Close the fuser cover (1). Make sure the green tabs at the left and right sides lock into place.
- Close the back cover until it locks in the closed position.
Se você precisar de assistência adicional, entre em contato com o atendimento ao cliente da Brother:
Comentários sobre o conteúdo
Para ajudar-nos a melhorar nosso suporte, forneça seus comentários abaixo.
