TD-4420TN
![ЧЗВ и отстраняване на неизправности ЧЗВ и отстраняване на неизправности](/g/b/shared/img/module/icon_question_33.png) |
ЧЗВ и отстраняване на неизправности |
How do I clean / maintain my printer?
> Clean the Sensors
> Clean the Tear Bar/ Peel Bar
> Clean the Exterior/ Interior
< Clean the Sensors >
-
Open the Roll Compartment Cover by pressing the tabs on both sides of the printer.
![Open the Roll Compartment Cover Open the Roll Compartment Cover](/g/b/img/faqend/faqp00001434_011/eu_ot/en/2225848/03_step1.gif)
-
Push the print head release button to open the print head mechanism.
![Push the print head Push the print head](/g/b/img/faqend/faqp00001434_011/eu_ot/en/2225849/03_step4_1.gif)
-
Turn off the printer.
-
Use compressed air or vacuum to clean the Gap Sensor (1) and Black Mark Sensor (2).
![Gap Sensor and Black Mark Sensor Gap Sensor and Black Mark Sensor](/g/b/img/faqend/faqp00001434_011/eu_ot/en/2225850/35_step1.gif)
1. Gap Sensor
2. Black Mark Sensor
We recommend cleaning the sensors as required.
< Clean the Tear Bar/ Peel Bar >
-
Open the Roll Compartment Cover by pressing the tabs on both sides of the printer.
-
Wipe the tear bar or peel bar with a lint-free cloth dipped in isopropyl alcohol or ethanol, as needed.
![Wipe the tear bar Wipe the tear bar](/g/b/img/faqend/faqp00001434_011/eu_ot/en/2225863/34_step2.gif) |
![Wipe the peel bar Wipe the peel bar](/g/b/img/faqend/faqp00001434_011/eu_ot/en/2225864/34_step2_2.gif) |
1. Tear Bar |
2. Peel Bar |
< Clean the Exterior/ Interior >
Exterior: Wipe it with a lint-free cloth dipped in water, as needed.
Interior: Use a brush or vacuum, as needed.
Ако няма отговор на вашия въпрос, проверихте ли други ЧЗВ?
Проверихте ли в ръководствата?
Ако ви е необходимо допълнително съдействие, моля, свържете се с центъра за клиенти на Brother:
Обратна връзка за съдържанието
За да ни помогнете да подобрим нашата поддръжка, моля, оставете вашата обратна връзка по-долу.