TD-4420TN
ЧЗВ и отстраняване на неизправности |
TD-4420TN
Дата: 14/04/2020 Идентификационен номер: faqp00001434_011
How do I clean / maintain my printer?
> Clean the Sensors
> Clean the Tear Bar/ Peel Bar
> Clean the Exterior/ Interior
-
Open the Roll Compartment Cover by pressing the tabs on both sides of the printer.
-
Push the print head release button to open the print head mechanism.
- Turn off the printer.
-
Use compressed air or vacuum to clean the Gap Sensor (1) and Black Mark Sensor (2).
1. Gap Sensor
2. Black Mark SensorWe recommend cleaning the sensors as required.
< Clean the Tear Bar/ Peel Bar >
-
Open the Roll Compartment Cover by pressing the tabs on both sides of the printer.
-
Wipe the tear bar or peel bar with a lint-free cloth dipped in isopropyl alcohol or ethanol, as needed.
1. Tear Bar 2. Peel Bar
< Clean the Exterior/ Interior >
Exterior: Wipe it with a lint-free cloth dipped in water, as needed.
Interior: Use a brush or vacuum, as needed.
Свързани ЧЗВ
Ако ви е необходимо допълнително съдействие, моля, свържете се с центъра за клиенти на Brother:
Обратна връзка за съдържанието
За да ни помогнете да подобрим нашата поддръжка, моля, оставете вашата обратна връзка по-долу.
Стъпка 1: Как ви помага информацията на тази страница?
Стъпка 2: Искате ли да добавите коментар?
Имайте предвид, че този формуляр се използва само за обратна връзка.