Support & Downloads

Linux Informations

Cupswrapper Driver Install(PJ-Printer CUPS)

Step 1. Login as a superuser ( or use "sudo" option if it is required )
Step 2. Download drivers
Download LPR driver and cupswrapper driver.
P-touch, QL/PJ-Printer Driver download page
Step 3. Install LPR driver and cupswrapper driver
3-1. Turn on your PJ-Printer and connect the USB cable.

*** Click the close button if the installation wizard comes up
3-2. Open the terminal and go to the directory where the drivers are.
3-3. Install LPR driver
Command (for dpkg)  :  dpkg  -i  --force-all  (lpr-drivername)
Command (for rpm)  :  rpm  -ihv  --nodeps  (lpr-drivername)
3-4. Install cupswrapper driver
Command (for dpkg)  :  dpkg  -i  --force-all  (cupswrapper-drivername)
Command (for rpm)  :  rpm  -ihv  --nodeps  (cupswrapper-drivername)
3-5. Check if the LPR driver and cupswrapper driver are installed
Command (for dpkg)  :  dpkg  -l  |  grep  Brother
Command (for rpm)  :  rpm  -qa  |  grep  -e  (lpr-drivername)  -e  (cupswrapper-drivername)
Step 4. Configure your printer on the cups web interface
4-1. Open a web browser and go to "http://localhost:631/printers".
4-2. Click "Modify Printer" and set following parameters.
- Your PJ-Printer's name
     for Device

  *** Select a entry with "USB #x"
  e.g. "Brother PJ-622 USB #1 (Brother PJ-622)"
- Brother      for Make/Manufacturer Selection
- Your PJ-Printer's name
     for Model/Driver Selection
Step 5. Try a test print
5-1. Open a web browser and go to "http://localhost:631/printers".
5-2. Click "Print Test Page"

Page Top