Support & Downloads

IPv6

Using the control panel, web browser on the BRAdmin Professional software or TELNET to enable the IPv6 protocol

  1. Printer control panel (machines with LCD panel)
    Select NETWORK => TCP/IP => IPv6=ON.
    Turn the printer OFF and then ON.
  2. EWS (Web Based Management)
    Select Network Configuration => Configure TCP/IP => Configure IPv6 => Enable => Submit.
    Turn the printer OFF and then ON.
  3. BRAdmin
    Select TCP/IP => Configure IPv6 => Enable => OK.
    Turn the printer OFF and then ON.
  4. TELNET
    Type in set ip v6 enable => exit.
    Turn the printer OFF and then ON.