(Date & Time)

-

-

Maintenance

-

-

Access the Maintenance settings menus.

Network

Wired LAN

-

WLAN(Wi-Fi)

-

Wi-Fi Direct

-

Tray Setting

-

-

Wi-Fi Direct

-

-

Eco Mode

-

-

Turn the following machine settings on:

• 2-sided Print: Long Edge *1 (supported models only)
• Sleep Time: 1 Min
• Dim Timer: 10 Secs
• Quiet Mode: On *1

All Settings

-

-

Configure the detailed settings.

Maintenance

Improve Print Quality

Check Print Quality

Check and correct the print quality, alignment and paper feeding according to the LCD instructions.

Alignment

Correct Paper Feed

Print Head Cleaning

-

Clean the print head according to the LCD instructions.

Remove Paper Scraps

-

Remove a piece of paper in the machine according to the LCD instructions.

Ink Volume

-

Check the available ink volume.

Ink Cartridge Model

-

Check your ink cartridge numbers.

Print Options

Reduce Smudging

Reduce smudging on the paper or paper jams during printing.

Reduce Uneven Lines

Reduce uneven lines on the paper during printing.

Enhance Print

Improve print quality and reduce blurriness.

Ink Cartridge Check

-

View your ink cartridge information.

Print Quality Auto Check

-

Automatically detects the Print Head condition and cleans the Print Head when needed.

Parts Life

Ink Capture Box

Check the remaining life of the Ink Capture Box.

Tray Setting

Tray 1

Paper Type

Set the type of paper in Tray #1.

Paper Size

Set the size of paper in Tray #1.

Tray 2

Paper Size

Set the size of paper in Tray #2.

MP Tray

Paper Type

Set the type of paper in the MP tray.

Paper Size

Set the size of paper in the MP tray.

Print

Tray Priority

Change the tray priority for printing from your computer.

JPEG Print (Media)

Select Tray

Select the tray to be used for printing photos from a USB flash drive.

Tray Priority

Change the tray priority for printing photos from a USB flash drive.

Check Paper

-

Check the paper type and paper size when you pull the tray out of the machine or set the paper in the MP tray.

Beep

-

-

Adjust the beeper volume.

LCD Settings

Backlight

-

Adjust the brightness of the LCD backlight.

Dim Timer

-

Set how long the LCD backlight stays on after the last finger press.

Keyboard Settings

-

-

Select the type of keyboard for the LCD.

Ecology

Eco Mode

-

Turn the following machine settings on:

• 2-sided Print: Long Edge *1 (supported models only)
• Sleep Time: 1 Min
• Dim Timer: 10 Secs
• Quiet Mode: On *1

Sleep Time

-

Set how long the machine must be idle before it goes into Sleep Mode.

Quiet Mode

-

Decrease printing noise.

Auto Power Off

-

Select how long the machine must wait before it automatically enters Power Off Mode.

When set to Off, the machine does not power off automatically.

-

Delete the registered Macro data.

-

Delete the registered Font data.

-

Emulation

-

-

Select the emulation mode.

-

-

Select the print quality.

Print Options

Font List

HP LaserJet

Print a list of the machine’s internal fonts.

BR-Script 3

Test Print

-

Print a test page.

2-sided

2-sided Print

-

Enable or disable 2-sided printing and choose long edge or short edge.

-

-

Set the output colour.

-

-

Set the paper type.

-

-

Set the paper size.

-

-

Set pages to print in either portrait or landscape orientation.

-

-

Allow the machine to print any remaining data automatically.

Configure HP LaserJet mode. (Available options depend on the fonts installed on your machine.)

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Choose whether the machine prints the error information when errors occur.

-

Set the page layout when printing multiple pages.

-

Set the PDF Print setting to print either comments (Markup) or stamps in the PDF file, along with the text.

-

Select if the machine scales or resizes the pages in the PDF file to fit the selected paper size.

Reset Printer

-

-

Restore the machine settings to the factory settings.

Wired LAN

TCP/IP

BOOT Method

-

Select the Boot method that best suits your needs.

IP Address

-

Enter the IP address.

Subnet Mask

-

Enter the Subnet mask.

Gateway

-

Enter the Gateway address.

Node Name

-

Enter the Node name.

WINS Configuration

-

Select the WINS configuration mode.

WINS Server

-

Specify the IP address of the primary or secondary WINS server.

DNS Server

-

Specify the IP address of the primary or secondary DNS server.

APIPA

-

Set the machine to allocate the IP address from the link-local address range automatically.

IPv6

-

Turn the IPv6 protocol on or off.

Ethernet

-

-

Select the Ethernet link mode.

Wired Status

-

-

View the current wired status.

MAC Address

-

-

View the machine's MAC address.

Set to Default

-

-

Restore the wired network settings to the factory settings.

Wired Enable

-

-

Turn the Wired LAN interface on or off manually.

WLAN(Wi-Fi)

Find Wi-Fi Network

-

-

Configure your wireless network settings manually.

Setup Support

-

-

Configure your wireless network settings according to the information displayed on the LCD.

WPS/Push Button

-

-

Configure your wireless network settings using the one-button push method.

WPS/PIN Code

-

-

Configure your wireless network settings using WPS with a PIN.

Recover WLAN

-

-

Reset and restart your wireless network.

WLAN Status

Status

-

View the current wireless network status.

Signal

-

View the current wireless network signal strength.

SSID

-

View the current SSID.

Comm. Mode

-

View the current Communication mode.

TCP/IP

BOOT Method

-

Select the Boot method that best suits your needs.

IP Address

-

Enter the IP address.

Subnet Mask

-

Enter the Subnet mask.

Gateway

-

Enter the Gateway address.

Node Name

-

Enter the Node name.

WINS Configuration

-

Select the WINS configuration mode.

WINS Server

-

Specify the IP address of the primary or secondary WINS server.

DNS Server

-

Specify the IP address of the primary or secondary DNS server.

APIPA

-

Set the machine to allocate the IP address from the link-local address range automatically.

IPv6

-

Turn the IPv6 protocol on or off.

MAC Address

-

-

View the machine's MAC address.

Set to Default

-

-

Restore the wireless network settings to the factory settings.

WLAN Enable

-

-

Turn the wireless network connection On or Off.

Wi-Fi Direct

Manual

-

-

Configure your Wi-Fi Direct network settings manually.

Group Owner

-

-

Set your machine as the Group Owner.

Push Button

-

-

Configure your Wi-Fi Direct network settings using the one-button push method.

PIN Code

-

-

Configure your Wi-Fi Direct network settings using WPS with a PIN code.

Device Information

Device Name

-

View your machine's device name.

SSID

-

View the Group Owner's SSID.

When the machine is not connected, the LCD displays Not Connected.

IP Address

-

View your machine's current IP Address.

Status Information

Status

-

View the current Wi-Fi Direct network status.

Signal

-

View the current Wi-Fi Direct network signal strength.

When your machine acts as Group Owner, the LCD always indicates a strong signal.

I/F Enable

-

-

Turn the Wi-Fi Direct connection on or off.

NFC

-

-

-

Turn the NFC function on or off.

Message from Brother

Message from Brother

-

-

Display messages and notifications from Brother.

Status

-

-

Web Connect Settings

Proxy Settings

Proxy Connection

-

Change the Web connection settings.

Address

-

Port

-

User Name

-

Password

-

Web Based Mgmt

-

-

-

Enable or disable Web Based Management.

If you enable this function, make sure you specify the connection method to use Web Based Management.

IPsec

-

-

-

IPsec is an optional security feature of the IP protocol that provides authentication and encryption services. We recommend contacting your network administrator before changing this setting.

IP Filter

-

-

-

Restrict access to your machine by enabling the IP filter.

Global Detect

Allow Detect

-

-

Enable or disable Global Detect, a function that detects and notifies the user when the user unintentionally connects to a global network.

Reject Access

-

-

Disable connections to the global network.

Network Reset

-

-

-

Restore the machine's network settings back to the factory settings, except the administrator password.

User Settings

Print a list of your User settings.

Network Configuration

Print a list of your Network settings.

Print File List

Print a list of data saved in the machine's memory.

WLAN Report

Print the wireless LAN connection results.

Serial No.

-

Check your machine's serial number.

Firmware Version

Main Version

Check your machine's firmware version.

Security Version

Firmware Update

-

Update your machine to the latest firmware.

Firmware Update Setup

-

Set the days and times for automatic firmware updates.

Page Counter

-

Check the total number of pages the machine has printed.

Date & Time

Date

Set the date and time on your machine.

Time

Auto Daylight

Set the machine to change automatically for Daylight Saving Time.

Time Zone

Set your time zone.

Reset

Machine Reset

Restore all the machine's settings that you have changed, such as Date and Time.

Network

Restore the machine's network settings back to the factory settings, except the administrator password.

All Settings

Restore all the machine's settings back to the factory settings.

Local Language

(Available only for some countries.)

-

Change your LCD language.