Menu table

There are nine menus. For more information about the selections available in each menu, see the tables below.

Note

The control panel LCD names for the paper trays are as follows.

•	Standard paper tray: TRAY1
•	Multi-purpose tray: MP
•	Optional lower tray: TRAY2, TRAY3

INFORMATION

Submenu	Menu Selections	Descriptions
PRINT SETTINGS		Prints the Printer Settings page.
PRINT TEST		Prints the test page.
PRINT DEMO¹		Prints the demonstration sheet.
PRINT FILE LIST		Prints the list of data saved in the embedded memory.
PRINT FONTS		Prints the font list and samples.
VERSION	SER.NO=#########	Shows printer serial number.
	ROM VER.=####	Shows main firmware version.
	ROM DATE##/##/##	Shows main firmware date.
	NET VER=####	Shows network firmware version.
	NET DATE##/##/##	Shows network firmware date.
	RAM SIZE =###MB	Shows the size of memory in this printer.
MAINTENANCE	PAGE COUNTER	Shows the current total printed pages.
	DRUM COUNT	Shows the pages printed with drum unit.
	REMAIN DRUM	Shows the pages left to print with drum unit.
	REMAIN PF KITMP	Shows the pages left to print with PF kit MP. See Replacing the consumable items.
	REMAIN PF KIT 1	Shows the pages left to print with PF kit 1. See Replacing the consumable items.
	REMAIN PF KIT 2	Shows the pages left to print with PF kit 2. See Replacing the consumable items.
	REMAIN PF KIT 3	Shows the pages left to print with PF kit 3. See Replacing the consumable items.
	REMAIN FUSER	Shows the pages left to print with fuser unit.
	REMAIN LASER	Shows the pages left to print with laser unit.

¹	This menu is only for some regions.

PAPER

Submenu	Options	Descriptions
SOURCE	AUTO*/MP/TRAY1/TRAY2/TRAY3	Chooses the tray that will be used.
PRIORITY	MP>T1>T2>T3*/T1>T2>T3>MP/T1>T2>T3	When SOURCE is chosen as AUTO: Chooses the order in which the printer uses the paper trays that contain paper of the same size.
MP FIRST	OFF*/ON	Chooses whether to feed paper from the MP tray as a priority.
MP SIZE	ANY*/LETTER/LEGAL/A4...	Chooses the size of paper you put in the MP tray.
MP MEDIA FIX	OFF*/PLAIN PAPER/THIN PAPER...	Chooses the media type of paper you put in the MP tray. When you choose the media type here (except OFF), the setting for Media Type selected in the printer driver will be ignored.
MANUAL FEED	OFF*/ON	Chooses whether you want to feed paper manually.
TRAY1 SIZE	ANY*/LETTER/LEGAL/A4...	Chooses the size of paper you loaded in the standard paper tray.
TRAY2 SIZE¹	ANY*/LETTER/LEGAL/A4...	Chooses the size of paper you loaded in the optional lower tray.
TRAY3 SIZE¹	ANY*/LETTER/LEGAL/A4...	Chooses the size of paper you loaded in the optional lower tray.
DUPLEX	OFF*/ON(LONG BIND)/ON(SHORT BIND)	Chooses whether you want to automatically print on both sides of the paper.
The default settings are shown in Bold with an asterisk.

¹	Tray2 and Tray3 are options.

QUALITY

Submenu	Options	Descriptions
RESOLUTION	300/600*/HQ1200/1200	Chooses a print resolution 300, 600 or 1200 dots per inch or HQ1200 (2400x600 dpi).
TONER SAVE	OFF*/ON
DENSITY	‑6/‑5/‑4/‑3/‑2/‑1/0*/1/2/3/4/5/6	Increases or decreases the print density.
The default settings are shown in Bold with an asterisk.

SETUP

Submenu	Menu Selections	Options	Descriptions
LANGUAGE		ENGLISH*/FRANÇAIS...	Changes the LCD language for your country.
PANEL CONTROL	LCD DENSITY	0*/1	Adjusts the density of the LCD.
	AUTO ONLINE	ON*/OFF
	BUTTON REPEAT	0.1*/0.2/0.3/0.4/0.5/1.0/1.5/2 SEC	Sets the time for the LCD message to change when holding + or - at intervals.
	MESSAGE SCROLL	LEVEL1*/LEVEL2.../LEVEL10	Sets the time in seconds that an LCD message will scroll across the LCD. From Level 1=0.2 to Level 10=2.0.
SLEEP TIME		1*/2/3/4/5...MINUTE	Sets the time to return to Sleep mode.
AUTO CONTINUE		OFF*/ON
LOCK PANEL	PASS NO.=###	OFF*/ON	Turns the lock panel settings ON or OFF.
REPRINT		OFF* /ON	Chooses whether you want to use Reprint functions.
PAGE PROTECTION		AUTO*/OFF/LETTER/A4/LEGAL	Chooses whether you want to create a full page copy of the printed page in the printer memory before the page is actually printed.
EMULATION		AUTO(EPSON)*/AUTO(IBM)/HP LASERJET/...	Chooses the emulation mode you want to use.
KEEP PCL		OFF*/ON	Chooses whether you want to save the current PCL settings.
RAMDISK SIZE		0*/1/2... MB
DELETE STORAGE	SECURE FILE		Deletes the data in ROM.
	MACRO ID(ROM)
	FONT ID(ROM)
	FORMAT(ROM)		Formats the ROM.
The default settings are shown in Bold with an asterisk.

PRINT MENU

Submenu	Menu Selections	Options	Descriptions
MEDIA TYPE		PLAIN PAPER*/THICK PAPER/TRANSPARENCIES/THICKER PAPER/THIN PAPER/BOND PAPER/ENVELOPES/ENV. THICK/ENV.THIN/RECYCLED PAPER	Sets the type of paper.
PAPER		LETTER/LEGAL/A4/EXECUTIVE/COM-10/DL/JIS B5/B5/A5/A5 L/B6/A6/MONARCH/C5/A4 LONG/FOLIO/DL L/HAGAKI	Sets the size of paper.
COPIES		1*/2.../999	Sets the number of printed pages.
ORIENTATION		PORTRAIT*/LANDSCAPE	This printer can print pages in portrait or landscape orientation.
PRINT POSITION	X OFFSET	‑500/‑499.../0*.../+499/ +500	Moves the print start position (at the top-left corner of pages) horizontally up to -500 (left) to +500 (right) dots in 300 dpi.
PRINT POSITION	Y OFFSET	‑500/‑499.../0*.../+499/ +500	Moves the print start position (at the top-left corner of pages) vertically up to -500 (up) to +500 (down) dots in 300 dpi.
AUTO FF TIME		OFF*/1/2/3.../99 (sec)	Allows you to print the remaining data without pressing Go.
FF SUPPRESS		OFF*/ON	Turns the feed suppress (PAUSE) setting ON or OFF.
HP LASERJET	FONT NO.	I000...####(59)*
	FONT PITCH	##.##(10.00/12.00)*
	FONT POINT	##.##(10.00/12.00)*
	SYMBOL SET	PC-8*...	Sets the symbol set or the character set.
	TABLE PRINT		Prints code table.
	AUTO LF	OFF*/ON	ON: CR CR+LF,OFF: CR CR
	AUTO CR	OFF*/ON	ON: LFLF+CR, FFFF+CR, or VT VT+CR OFF: LF LF, FF FF, or VT VT
	AUTO WRAP	OFF*/ON	Chooses whether a line feed and carriage return will happen when the printer position reaches the right margin.
	AUTO SKIP	ON*/OFF	Chooses whether a line feed and carriage return will happen when the printer position reaches the bottom margin.
	LEFT MARGIN	####	Sets the left margin at column 0 to 70 columns at 10 cpi.
	RIGHT MARGIN	####	Sets the right margin at column 10 to 80 columns at 10 cpi.
	TOP MARGIN	####	Sets the top margin at a distance from the top edge of the paper: 0, 0.33, 0.5, 1.0, 1.5 or 2.0. The default setting is 0.5.
	BOTTOM MARGIN	####	Sets the bottom margin at a distance from the bottom edge of the paper - 0, 0.33, 0.5, 1.0, 1.5 or 2.0. The default setting is 0.33 (None-HP), 0.5 (HP).
	LINES	####	Sets the number of lines on each page from 5 to 128 lines.
EPSON FX-850	FONT NO.	I000...####(59)*
	FONT PITCH	##.##(10.00/12.00)*
	FONT POINT	##.##(10.00/12.00)*
	CHARACTER SET	PC-8...(US ASCII)*	Sets the symbol set or the character set.
	TABLE PRINT		Prints code table.
	AUTO LF	OFF*/ON	ON: CR CR+LF OFF: CR CR
	AUTO MASK	OFF*/ON
	LEFT MARGIN	####	Sets the left margin at column 0 to 70 columns at 10 cpi.
	RIGHT MARGIN	####	Sets the right margin at column 10 to 80 columns at 10 cpi.
	TOP MARGIN	####	Sets the top margin at a distance from the top edge of the paper - 0, 0.33, 0.5, 1.0, 1.5 or 2.0. The default setting is 0.33.
	BOTTOM MARGIN	####	Sets the bottom margin at a distance from the bottom edge of the paper - 0, 0.33, 0.5, 1.0, 1.5 or 2.0. The default setting is 0.33.
	LINES	####	Sets the number of lines on each page from 5 to 128 lines.
IBM PROPRINTER	FONT NO.	I000...####(59)*
	FONT PITCH	##.##(10.00/12.00)*
	CHARACTER SET	PC-8*...	Sets the symbol set or the character set.
	TABLE PRINT		Prints code table.
	AUTO LF	OFF*/ON	ON: CR CR+LF,OFF: CR CR
	AUTO CR	OFF*/ON	ON: LFLF+CR, FFFF+CR, or VT VT+CR OFF: LF LF, FF FF, or VT VT
	AUTO MASK	OFF*/ON
	LEFT MARGIN	####	Sets the left margin at column 0 to 70 columns at 10 cpi.
	RIGHT MARGIN	####	Sets the right margin at column 10 to 80 columns at 10 cpi.
	TOP MARGIN	####	Sets the top margin at a distance from the top edge of the paper - 0, 0.33, 0.5, 1.0, 1.5 or 2.0. The default setting is 0.33.
	BOTTOM MARGIN	####	Sets the bottom margin at a distance from the bottom edge of the paper - 0, 0.33, 0.5, 1.0, 1.5 or 2.0. The default setting is 0.33.
	LINES	####	Sets the number of lines on each page from 5 to 128 lines.
BR-SCRIPT3	ERROR PRINT	ON*/OFF
CARBON MENU	CARBON COPY	OFF*/ON/AUTO/PARALLEL
	COPIES	1.../8
	COPY 1 TRAY	AUTO/REMAINING/MP/TRAY1/TRAY2/TRAY3
	COPY 1 MACRO	(ID number)
	COPY 2 TRAY...COPY 8 TRAY	AUTO/REMAINING/MP/TRAY1/TRAY2/TRAY3	Appears when printing 2 pages or more.
	COPY 2 MACRO...COPY 8 MACRO	(ID number)	Appears when printing 2 pages or more.
The default settings are shown in Bold with an asterisk.

NETWORK

Submenu	Menu Selections	Options	Descriptions
TCP/IP	BOOT METHOD	AUTO*/STATIC/RARP/BOOTP/DHCP	Chooses the IP method that best suits your needs.
	IP ADDRESS=	[000-255] . [000-255] . [000-255] . [000-255] [000-000] . [000-000] . [000-000] . [000-000]*¹	Enter the IP address.
	SUBNET MASK=	[000-255] . [000-255] . [000-255] . [000-255] [000-000] . [000-000] . [000-000] . [000-000]*¹	Enter the Subnet mask.
	GATEWAY=	[000-255] . [000-255] . [000-255] . [000-255] [000-000] . [000-000] . [000-000] . [000-000]*	Enter the Gateway address.
	IP BOOT TRIES	# (3)*
	APIPA	ON*/OFF	Automatically allocates the IP address from the link-local address range.¹
	IPV6	ON /OFF*
ETHERNET		AUTO*/100B-FD/100B-HD/ 10B-FD/10B-HD	Chooses Ethernet link mode.
FACTORY RESET		RESTART PRINTER?
The default settings are shown in Bold with an asterisk.

On connection to the network, if the machine's 'BOOT METHOD' is 'AUTO' the machine will attempt to automatically set the IP address and Subnet Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found an APIPA IP address will be allocated, such as 169.254.[001‑254].[000-255]. If the 'BOOT METHOD' of the machine is set to 'STATIC' you will need to manually enter an IP address from the machine's control panel.

INTERFACE

Submenu	Menu Selections	Options	Description
SELECT		AUTO*/USB/PARALLEL/NETWORK
AUTO IF TIME		1/2/3/4/5*.../99 (SEC)	You need to set the time-out period for the auto interface selection.
INPUT BUFFER		LEVEL 1/2/3*.../15	Increases or decreases the input buffer capacity.
PARALLEL	HIGH SPEED	ON*/OFF	Turns high-speed parallel communications ON or OFF.
	BI-DIR	ON*/OFF	Turns bi-directional parallel communications ON or OFF.
	INPUT PRIME	ON/OFF*	Turns prime signal ON or OFF.
The default settings are shown in Bold with an asterisk.

RESET MENU

Display Shows	Description
RESET PRINTER	Resets the printer and restores all printer settings (including command settings) to settings you have previously made with the control panel buttons.
FACTORY RESET	Resets the printer and restores all printer settings (including command settings) to the default settings.

Example of changing the menu setting

Setting IP Address

Press + or - to choose NETWORK (and to display each setting shown below).

INFORMATION

NETWORK

Press Set.

TCP/IP

Press Set.

BOOT METHOD

Press +.

IP ADDRESS=

Press Set.

The last digit in the first part of the number is blinking.

000.000.000.000*

Press + or - to increase or decrease the number.

Press Set to go to the next number.

123.000.000.192

Repeat this process until you have set your IP address.

123.045.067.089

Press Set to finish the IP address.

An asterisk appears at the end of the LCD.

123.045.067.089

Page Top