Reprinting from RAM
You can reprint from random access memory (RAM). The reprint data in RAM will be deleted when the printer is turned off.
When you use RAM to reprint:
| 1 | Press Set on the control panel. |
| 2 | Press + or - to choose SETUP. Press Set. |
| 3 | Press + or - to choose RAMDISK SIZE. Press Set. |
| 4 | The present RAM disk is 0MB. Press + to increase the reprint RAM size in increments of 1MB. |
| 5 | Press Set. |
Note
When you increase the RAM size for secure printing, the work area of the printer is decreased and the printer performance will be reduced. Make sure that you reset the RAM disk size to 0MB after you finish using secure printing.
We recommend that you add more RAM if you want to be able to print a lot of secure data. (See
Installing extra memory).
Reprinting the last job
You can reprint the data from the last print job without sending it from the computer again.
Note
| • | If the REPRINT setting is set to OFF on the control panel and you press Go for about 4 seconds, the LCD shows NO DATA STORED for a short time. |
| • | If you want to cancel reprinting, press Job Cancel. |
| • | If the printer does not have enough memory to spool the print job data, it will not reprint the document. |
| • | Pressing + or - makes the number of reprint copies increase or decrease. You can choose between 1 and 999 COPIES. |
| • | |
| • | After turning the power switch off, the last job data will be deleted. |
How to reprint the last job
| 1 | Make sure that the REPRINT setting is ON by using the buttons on the control panel to enter the SETUP menu. Note If you print with the printer driver we have supplied with the printer, the settings for Use Reprint in the printer driver will take priority over the settings made on the control panel. (For more information, see Use Reprint.) |
| 2 | Press Go for about 4 seconds. COPIES =1  |
|
| 3 | Press + to enter the number of copies you want. COPIES =3 |
|
| 4 | Press Set. If you press Go, the LCD shows PRESS SET TO PRINT. PRINTING |
COPIES =1 |
Note | • | Pressing + or - makes the number of reprint copies increase or decrease. You can choose between 1 and 999 COPIES. | | • | If you wait 30 seconds to continue the control panel operation, the LCD leaves the REPRINT setting automatically. |
|
When there is no last job data in memory
If the printer does not have reprint data in the memory and you press Go for about 4 seconds, the LCD will show NO DATA STORED.
Canceling reprinting data
If you want to cancel the current reprint job, press Job Cancel. Job Cancel also allows you to cancel a paused reprint job.
