Home PrintPrevious Next

Manual duplex printing

• 
The BR-Script printer driver (PostScript® 3™ emulation) does not support manual duplex printing.
• 
If you are using the Macintosh Printer Driver, see Duplex Printing.
Manual duplex printing from the paper tray
1
In the printer driver choose the Basic tab, and choose the Duplex printing mode from the Duplex / Booklet setting, and then from the Basic tab choose the Paper Source to be Tray1.
2
Click the Duplex Settings... button, the Duplex Settings will appear.
3
Choose Manual Duplex from Duplex Mode settings, and click OK on the computer screen.
4
Send the data to the printer.
The printer will automatically print all the even-numbered pages on one side of the paper first.
Screen
5
Remove the printed even-numbered pages from the output tray and then , in the same order1, put them back in the paper tray with the side to be printed on (blank side) face down. Follow the instructions on the computer screen.
1
Put papers in opposite order when the Back output tray is opened.
Screen
6
The printer will now automatically print all the odd-numbered pages on the other side of the paper.
Note Note
• 
If you choose the Paper Source to be Auto Select, put the printed even-numbered pages in the MP tray.
• 
When you put paper in the paper tray, first empty the tray. Next, put the printed pages in the tray, with the printed side face up. (DO NOT add the printed pages to the top of a stack of unprinted paper.)
Manual duplex printing from the MP tray
Note Note
Before putting the sheets back in the MP tray, you will have to straighten them, or you may get paper jams.
1
In the printer driver choose the Basic tab, and choose the Duplex printing mode from the Duplex / Booklet setting, and then from the Basic tab choose the Paper Source to be MP Tray.
2
Click the Duplex Settings... button, the Duplex Settings will appear.
3
Choose Manual Duplex from Duplex Mode settings, and click OK on the computer screen.
4
Put the paper in the MP tray with the side to be printed on first facing up. Send the data to the printer.
The printer will automatically print all the even-numbered pages on one side of the paper first.
Graphic
Screen
5
Remove the printed even-numbered pages from the output tray and then, in the same order1, put them back into the MP tray. Put the paper with the side to be printed on (the blank side) face up. Follow the instructions on the computer screen.
Screen
1
Put papers in opposite order when the Back output tray is opened.
6
The printer will now automatically print all the odd-numbered pages.
Paper orientation for manual duplex printing
The printer prints the second page first.
If you print 10 pages on 5 sheets of paper, it will print page 2 and then page 1 on the first sheet of paper. It will print page 4 and then page 3 on the second sheet of paper. It will print page 6 and then page 5 on the third sheet of paper, and so on.
When doing manual duplex printing, the paper must be put in the paper tray in the following way:
• 
For the paper tray:
• 
Put the side to be printed on face down with the leading edge (top) of the paper at the front of the tray.
• 
To print on the second side, put the paper face up, with the leading edge (top) of the paper at the front of the tray.
• 
If letterhead paper is used, put the paper in the tray with the heading face up at the front of the tray.
• 
To print on the second side, put the heading face down at the front of the tray.
• 
For the multi-purpose tray (MP tray):
• 
Put the side to be printed on face up with the leading edge (top) of the paper in first.
• 
To print on the second side, put the paper face down, with the leading edge (top) of the paper in first.
• 
If letterhead paper is used, put it in with the heading face down and in first.
• 
To print on the second side, put the heading face up and in first.
Page Top
Home PrintPrevious Next