Home > Machine Settings > Change Machine Settings from the Control Panel > Settings and Features Tables > Settings Tables (2.7"(67.5 mm) Touchscreen models)
Settings Tables (2.7"(67.5 mm) Touchscreen models)
These tables will help you understand your machine's menu selections and options.
[Settings]
[Settings]
Level 1 | Level 2 | Level 3 | Descriptions |
|---|---|---|---|
(Date & Time) | Date | - | Set the date and time on your machine. |
Time | - | ||
Time Zone | - | Set your time zone. | |
Maintenance | Improve Print Quality | - | Check and correct the print quality, alignment and paper feeding according to the LCD instructions. |
Print Head Cleaning | - | Clean the print head according to the LCD instructions. | |
Remove Paper Scraps | - | Remove a piece of paper in the machine according to the LCD instructions. | |
Ink Low Notice | - | Set the machine to display the ink low messages. | |
Ink Bottle Model | - | Check the ink bottle numbers. | |
Print Setting Options | Reduce Smudging | Reduce smudging on the paper or paper jams during printing. | |
Reduce Uneven Lines | Reduce uneven lines on the paper during printing. | ||
Slow Drying Paper | Use this setting when printing with a type of plain paper on which the ink dries very slowly. | ||
Wi-Fi | TCP/IP | - | Set TCP/IP protocol. |
Setup Wizard | - | Configure your wireless network settings manually. | |
WLAN Assistant | - | Configure your wireless network settings using the Brother installation disc. | |
WPS | - | Configure your wireless network settings using the one-button push method. | |
WPS w/ PIN Code | - | Configure your wireless network settings using WPS with a PIN. | |
WLAN Status | - | View the current wireless network status. | |
MAC Address | - | View the machine's MAC address. | |
Tray Setting | Tray #1 | Paper Type | Set the type of paper in the paper tray #1. |
Paper Size | Set the size of paper in the paper tray #1. | ||
MP Tray | Paper Type | Set the type of paper in the MP tray. | |
Paper Size | Set the size of paper in the MP tray. | ||
Beep | - | - | Adjust the beeper volume. |
All Settings | - | - | Configure the detailed settings. |
[General Setup]
Level 1 | Level 2 | Level 3 | Descriptions |
|---|---|---|---|
Maintenance | Improve Print Quality | - | Check and correct the print quality, alignment and paper feeding according to the LCD instructions. |
Print Head Cleaning | - | Clean the print head according to the LCD instructions. | |
Remove Paper Scraps | - | Remove a piece of paper in the machine according to the LCD instructions. | |
Ink Low Notice | - | Set the machine to display the ink low messages. | |
Ink Bottle Model | - | Check the ink bottle numbers. | |
Print Setting Options | Reduce Smudging | Reduce smudging on the paper or paper jams during printing. | |
Reduce Uneven Lines | Reduce uneven lines on the paper during printing. | ||
Slow Drying Paper | Use this setting when printing with a type of plain paper on which the ink dries very slowly. | ||
Tray Setting | Tray #1 | Paper Type | Set the type of paper in the paper tray #1. |
Paper Size | Set the size of paper in the paper tray #1. | ||
MP Tray | Paper Type | Set the type of paper in the MP tray. | |
Paper Size | Set the size of paper in the MP tray. | ||
Tray Setting: Print | Tray Priority | Change the tray priority for printing from your computer. | |
Tray Setting: JPEG Print (Media) | Tray Use | Select the tray to be used for printing photos from a USB flash drive. | |
Tray Priority | Change the tray priority for printing photos from a USB flash drive. | ||
Check Paper | - | Check the paper type and paper size when you pull the tray out of the machine or set the paper in the MP tray. Check the paper type and paper size when you pull the tray out of the machine. | |
Quiet Mode | - | - | Decrease printing noise. |
Beep | - | - | Adjust the beeper volume. |
LCD Settings | Backlight | - | Adjust the brightness of the LCD backlight. |
Dim Timer | - | Set how long the LCD backlight stays on after the last finger press. | |
Keyboard Settings | - | - | Select the type of keyboard for the LCD. |
Sleep Mode | - | - | Select how long the machine must be idle before it goes into Sleep Mode. |
Auto Power Off | - | - | Select how long the machine must wait before it automatically turns itself off after entering Sleep Mode. When set to Off, the machine does not power off automatically. |
[Network]
Level 1 | Level 2 | Level 3 | Level 4 | Descriptions |
|---|---|---|---|---|
Wired LAN | TCP/IP | BOOT Method | - | Select the Boot method that best suits your needs. |
IP Address | - | Enter the IP address. | ||
Subnet Mask | - | Enter the Subnet mask. | ||
Gateway | - | Enter the Gateway address. | ||
Node Name | - | Enter the Node name. | ||
WINS Configuration | - | Select the WINS configuration mode. | ||
WINS Server | - | Specify the IP address of the primary or secondary WINS server. | ||
DNS Server | - | Specify the IP address of the primary or secondary DNS server. | ||
APIPA | - | Set the machine to allocate the IP address from the link-local address range automatically. | ||
IPv6 | - | Turn the IPv6 protocol on or off. | ||
Ethernet | - | - | Select the Ethernet link mode. | |
Wired Status | - | - | View the current wired status. | |
MAC Address | - | - | View the machine's MAC address. | |
WLAN | TCP/IP | BOOT Method | - | Select the Boot method that best suits your needs. |
IP Address | - | Enter the IP address. | ||
Subnet Mask | - | Enter the Subnet mask. | ||
Gateway | - | Enter the Gateway address. | ||
Node Name | - | Enter the Node name. | ||
WINS Configuration | - | Select the WINS configuration mode. | ||
WINS Server | - | Specify the IP address of the primary or secondary WINS server. | ||
DNS Server | - | Specify the IP address of the primary or secondary DNS server. | ||
APIPA | - | Set the machine to allocate the IP address from the link-local address range automatically. | ||
IPv6 | - | Turn the IPv6 protocol on or off. | ||
Setup Wizard | - | - | Configure your wireless network settings manually. | |
WLAN Assistant | - | - | Configure your wireless network settings using the Brother installation disc. | |
WPS | - | - | Configure your wireless network settings using the one-button push method. | |
WPS w/ PIN Code | - | - | Configure your wireless network settings using WPS with a PIN. | |
WLAN Status | Status | - | View the current wireless network status. | |
Signal | - | View the current wireless network signal strength. | ||
SSID | - | View the current SSID. | ||
Comm. Mode | - | View the current Communication mode. | ||
MAC Address | - | - | View the machine's MAC address. | |
Wi-Fi Direct | Push Button | - | - | Configure your Wi-Fi Direct network settings using the one-button push method. |
PIN Code | - | - | Configure your Wi-Fi Direct network settings using WPS with a PIN code. | |
Manual | - | - | Configure your Wi-Fi Direct network settings manually. | |
Group Owner | - | - | Set your machine as the Group Owner. | |
Device Information | Device Name | - | View your machine's device name. | |
SSID | - | View the Group Owner's SSID. When the machine is not connected, the LCD displays Not Connected. | ||
IP Address | - | View your machine's current IP Address. | ||
Status Information | Status | - | View the current Wi-Fi Direct network status. | |
Signal | - | View the current Wi-Fi Direct network signal strength. When your machine acts as Group Owner, the LCD always indicates a strong signal. | ||
I/F Enable | - | - | Turn the Wi-Fi Direct connection on or off. | |
Message from Brother | Message from Brother | - | - | Display messages and notifications from Brother. |
Status | - | - | ||
Web Connect Settings | Proxy Settings | Proxy Connection | - | Change the Web connection settings. |
Address | - | |||
Port | - | |||
User Name | - | |||
Password | - | |||
Network I/F | - | - | - | Select the network connection type. |
IPsec | - | - | - | IPsec is an optional security feature of the IP protocol that provides authentication and encryption services. We recommend contacting your network administrator before changing this setting. |
Network Reset | - | - | - | Restore all network settings back to the factory settings. |
[Print Reports]
Level 1 | Descriptions |
|---|---|
User Settings | Print a list of your settings. |
Network Configuration | Print a list of your Network settings. |
WLAN Report | Print the wireless LAN connection results. |
[Machine Info.]
Level 1 | Level 2 | Descriptions |
|---|---|---|
Serial No. | - | Check your machine's serial number. |
Firmware Version | Main Version | Check your machine's firmware version. |
Firmware Update | - | Update your machine to the latest firmware. |
Firmware Auto Check | - | View firmware information on the Home screen. |
Page Counter | - | Display the printed pages. |
[Initial Setup]
Level 1 | Level 2 | Descriptions |
|---|---|---|
Date & Time | Date | Set the date and time on your machine. |
Time | ||
Time Zone | Set your time zone. | |
Reset | Machine Reset | Restore all the machine's settings that you have changed, such as Date and Time. |
Network | Restore all network settings back to the factory settings. | |
All Settings | Restore all the machine's settings back to the factory settings. | |
Local Language (Available only for some countries.) | - | Change your LCD language. |