Toner

Toner Life

-

View the approximate remaining toner life.

Test Print

-

Print a test page.

Colour Correction

Correction Start

Perform colour calibration to check and correct colours, and then perform registration to align the print position of each colour.

Reset

Reset the calibration parameters to the default settings.

Network

Wired LAN

-

Access the Wired LAN setting menus.

WLAN(Wi-Fi)  *1

-

Access the WLAN setting menus.

Tray Setting

-

-

Access the tray setting menus.

Wi-Fi Direct

-

-

Access the Wi-Fi Direct setting menus.

Eco Mode

-

-

Turn the following machine settings on at the same time.

• 2-sided Print: Long Edge *2
• Sleep Time: 0 Min
• Dim Timer: 10 Secs
• Quiet Mode:On *2
• Toner Save:On *2

All Settings

-

-

Configure the detailed settings.

Tray Setting

Paper Type

MP Tray

-

Select the paper type that matches the paper in the MP tray.

Tray 1

-

Select the paper type that matches the paper in the standard paper tray.

Tray 2 *1

-

Select the paper type that matches the paper in the Optional Tray (Tray 2).

Tray 3 *1

-

Select the paper type that matches the paper in the Optional Tray (Tray 3).

Tray 4 *1

-

Select the paper type that matches the paper in the Optional Tray (Tray 4).

Tray 5 *2

-

Select the paper type that matches the paper in the Optional Tray (Tray 5).

Paper Size

MP Tray

-

Select the size of paper you loaded in the MP tray.

Tray 1

-

Select the size of paper you loaded in the standard paper tray.

Tray 2 *1

-

Select the size of paper you loaded in the Optional Tray (Tray 2).

Tray 3 *1

-

Select the size of paper you loaded in the Optional Tray (Tray 3).

Tray 4 *1

-

Select the size of paper you loaded in the Optional Tray (Tray 4).

Tray 5 *2

-

Select the size of paper you loaded in the Optional Tray (Tray 5).

Tray Use

-

-

Select the tray you want to use.

Priority

-

-

When the Auto option is selected in the Tray Use menu, select the order in which the machine uses paper trays that contain paper of the same size.

Print Position

MP Tray

X Offset

Move the print start position (at the top-left corner of pages) of paper you loaded in the MP tray horizontally up to -500 (left) to +500 (right) dots in 300 dpi.

Y Offset

Move the print start position (at the top-left corner of pages) of paper you loaded in the MP tray vertically up to -500 (up) to +500 (down) dots in 300 dpi.

Tray 1

X Offset

Move the print start position (at the top-left corner of pages) of paper you loaded in the standard paper tray horizontally up to -500 (left) to +500 (right) dots in 300 dpi.

Y Offset

Move the print start position (at the top-left corner of pages) of paper you loaded in the standard paper tray vertically up to -500 (up) to +500 (down) dots in 300 dpi.

Tray 2 *1

X Offset

Move the print start position (at the top-left corner of pages) of paper you loaded in the Optional Tray (Tray 2) horizontally up to -500 (left) to +500 (right) dots in 300 dpi.

Y Offset

Move the print start position (at the top-left corner of pages) of paper you loaded in the Optional Tray (Tray 2) vertically up to -500 (up) to +500 (down) dots in 300 dpi.

Tray 3 *1

X Offset

Move the print start position (at the top-left corner of pages) of paper you loaded in the Optional Tray (Tray 3) horizontally up to -500 (left) to +500 (right) dots in 300 dpi.

Y Offset

Move the print start position (at the top-left corner of pages) of paper you loaded in the Optional Tray (Tray 3) vertically up to -500 (up) to +500 (down) dots in 300 dpi.

Tray 4 *1

X Offset

Move the print start position (at the top-left corner of pages) of paper you loaded in the Optional Tray (Tray 4) horizontally up to -500 (left) to +500 (right) dots in 300 dpi.

Y Offset

Move the print start position (at the top-left corner of pages) of paper you loaded in the Optional Tray (Tray 4) vertically up to -500 (up) to +500 (down) dots in 300 dpi.

Tray 5 *2

X Offset

Move the print start position (at the top-left corner of pages) of paper you loaded in the Optional Tray (Tray 5) horizontally up to -500 (left) to +500 (right) dots in 300 dpi.

Y Offset

Move the print start position (at the top-left corner of pages) of paper you loaded in the Optional Tray (Tray 5) vertically up to -500 (up) to +500 (down) dots in 300 dpi.

Output Tray *3

-

-

Select the output tray you want to use.

Staple *4

-

-

Select whether to staple print jobs and eject the pages onto the Stapler Finisher Output Tray.

Offset *4

-

-

Select whether to shift print jobs ejected onto the Stapler Finisher Output Tray for easier collating.

SF Continue *4

-

-

Select if you want the machine to continue printing when the selected paper size or media type is not supported by the Stapler Finisher (SF).

MX Continue *5

-

-

Select if you want the machine to continue printing as soon as there is any free space in the Mailbox (MX).

Skip Tray *6

-

-

Select a specific tray you do not want to use if it is loaded with paper of the wrong size.

Separator Tray *6

-

-

Select the tray that contains the paper used as the separator paper, which is inserted between each print job.

Paper Low Notice

Paper Low Notice

-

Select whether to display a message telling you that the paper tray is nearly empty.

Notice Level

-

Select the minimum paper level that will trigger the message.

Check Paper

-

-

Select whether to display a message telling you to check the paper type and paper size when you pull the tray out of the machine.

LCD Settings

Backlight

-

-

Adjust the brightness of the LCD backlight.

Dim Timer

-

-

Set how long the LCD backlight stays on after the last finger press.

Screen Settings

Display Information

IP Address

-

Select whether to display your machine's IP Address on the Home screen.

Ecology

Eco Mode

-

-

Turn the following machine settings on at the same time.

• 2-sided Print: Long Edge *7
• Sleep Time: 0 Min
• Dim Timer: 10 Secs
• Quiet Mode:On *7
• Toner Save:On *7

Toner Save

-

-

Increase the page yield of the toner cartridge.

Sleep Time

-

-

Set how much time will pass before the machine enters Power Saving mode.

Quiet Mode

-

-

Decrease printing noise.

Auto Power Off

-

-

Set the number of hours that the machine will remain in Deep Sleep mode before going into Power Off mode.

Setting Lock

Set Password

-

-

Restrict unauthorised users from changing the machine’s settings.

Lock Off⇒On

-

-

New Password

(Available only when you enter the password for the first time.)

-

-

Interface

Select

-

-

Select the interface to use.

If you select the Auto option, the machine changes the interface to USB or Network depending on which interface is receiving data.

Auto IF Time

-

-

Set the time-out period for the auto interface selection.

Input Buffer

-

-

Increase or decrease the input buffer capacity.

Delete Storage

Macro ID

-

-

Delete the registered Macro data.

Stream ID

-

-

Delete the registered Stream data.

Font ID

-

-

Delete the registered Font data.

Delete All

-

-

Restore the Macro, Stream and Font data of your machine to the default settings.

Initialise USB Flash Drive

(Available only when the USB flash drive is selected in the Job Save Location menu.)

-

-

Initialise the USB flash drive for USB Storage Print. Initialising the USB flash drive takes more than 40 minutes.

Emulation

-

-

Choose the emulation mode.

Quality

-

-

Select the print quality.

Print Options

Font List

HP LaserJet

Print the font list and samples of HP LaserJet.

BR-Script 3

Print the font list and samples of BR-Script.

Test Print

-

Print the test page.

2-sided

2-sided Print

-

Select whether to print on both sides of the paper.

Single Image

-

For a print job where the last page is a 1-sided image, select the 1-sided Feed option to reduce printing time.

When you use letterhead or preprinted paper, you must select the 2-sided Feed option. If you select 1-sided Feed for letterhead or preprinted paper, the last page will be printed on the reverse side.

Auto Continue

-

-

Select if you want the machine to clear paper size errors or media type errors automatically, and use paper from other trays.

Output Colour

-

-

Set the output colour.

Paper Type

-

-

Set the type of paper.

Paper Size

-

-

Set the size of paper.

Copies

-

-

Set the number of printed pages.

Orientation

-

-

Set pages to print in either portrait or landscape orientation.

Print Position

-

-

Access the Print Position setting menus.

Auto FF

-

-

Allow the machine to print any remaining data automatically.

HP LaserJet

Font No.

Font No.

Set the font number.

This menu appears if a soft font is installed on your Brother machine.

Soft Font No.

Set the soft font number.

This menu appears if a soft font is installed on your Brother machine.

Font Pitch

-

Set the font pitch.

(Available for certain font numbers)

Font Point

-

Set the font size.

(Available for certain font numbers)

Symbol Set

-

Select the symbol or character set.

Table Print

-

Print the code table.

Auto LF

-

ON: CR -> CR+LF, OFF: CR -> CR

Auto CR

-

ON: LF -> LF+CR, FF -> FF+CR, or VT -> VT+CR

OFF: LF -> LF, FF -> FF, or VT -> VT

Auto WRAP

-

Choose whether a line feed and carriage return will happen when the machine reaches the right margin.

Auto SKIP

-

Choose whether a line feed and carriage return will happen when the carriage position reaches the bottom margin.

Left Margin

-

Set the left margin at column 0 to 70 columns at 1 cpi.

Right Margin

-

Set the right margin at column 10 to 80 columns at 1 cpi.

Top Margin

-

Set the top margin distance from the top edge of the paper.

Bottom Margin

-

Set the bottom margin distance from the bottom edge of the paper.

Lines

-

Set the number of lines on each page.

Tray Command

-

Select this setting if a tray mismatch appears when you use the HP drivers.

BR-Script 3

Error Print

-

Choose whether the machine prints the error information when errors occur.

CAPT

-

Use CAPT (Colour Advanced Printing Technology) for optimal print quality when printing a PS file created by a non-Brother PS driver.

Colours and photos appear clearer and more accurate. Print speed will be slower.

PDF

Multiple Page

-

Set the page layout when printing multiple pages.

PDF Print Options

-

Set the PDF Print setting to print either comments (Markup) or stamps in the PDF file, along with the text.

PDF Fit to Page

-

Select if the machine scales or resizes the pages in the PDF file to fit the selected paper size.

Carbon Menu

Carbon Copy

-

Enable or disable the Carbon Copy function.

Copies

-

Sets the number of printed pages.

Copy1 Tray

-

Select the tray you use for Copy1.

Copy1 Stream

-

Select a stream for Copy1.

Copy2 Tray

Copy8 Tray

-

Select the tray you use for Copy2 to 8.

Copy2 Stream

Copy8 Stream

-

Select a stream for Copy2 to 8.

Colour Correction

Correction Start

-

Perform colour calibration to check and correct colours, and then perform registration to align the print position of each colour.

Reset

-

Reset the calibration parameters to the default settings.

Auto Correction

-

Set the machine to perform Colour Calibration and Registration automatically.

Colour Settings

Setting Mode

Select whether to apply the colour print settings of the machine or the printer driver.

Colour Mode

Select the colour mode.

Improve Gray Colour

Turn on or off to improve the image quality of shaded areas.

Enhance Black Printing

Turn on or off if a black graphic does not print correctly.

Brightness

Adjust the brightness.

Contrast

Adjust the contrast.

Red

Adjust the red colour.

Green

Adjust the green colour.

Blue

Adjust the blue colour.

Job Save Location

-

-

Select the location where you want to save print jobs.

Reset Printer

-

-

Restore the printer settings to the factory settings.

Wired LAN

TCP/IP

Boot Method

-

Choose the IP method that best suits your needs.

IP Address

-

Enter the IP address.

Subnet Mask

-

Enter the Subnet mask.

Gateway

-

Enter the Gateway address.

Node Name

-

Enter the Node name.

WINS Configuration

-

Select the WINS configuration mode.

WINS Server

Primary

Specify the IP address of the primary WINS server.

Secondary

Specify the IP address of the secondary WINS server.

DNS Server

Primary

Specify the primary DNS server's IP address.

Secondary

Specify the secondary DNS server's IP address.

APIPA

-

Allocate the IP address from the link-local address range automatically *1.

IPv6

-

Enable or disable the IPv6 protocol.

Ethernet

-

-

Choose the Ethernet link mode.

Wired Status

-

-

Display the Ethernet link status.

MAC Address

-

-

Display the MAC address of the machine.

Set to Default *2

-

-

Restore wired network settings of your machine to the factory settings.

Wired Enable *2

-

-

Turn the wired interface on or off.

WLAN(Wi-Fi)  *2

Find Wi-Fi Network

-

-

Configure your wireless network settings manually.

TCP/IP

Boot Method

-

Choose the IP method that best suits your needs.

IP Address

-

Enter the IP address.

Subnet Mask

-

Enter the Subnet mask.

Gateway

-

Enter the Gateway address.

Node Name

-

Enter the Node name.

WINS Configuration

-

Select the WINS configuration mode.

WINS Server

Primary

Specify the IP address of the primary WINS server.

Secondary

Specify the IP address of the secondary WINS server.

DNS Server

Primary

Specify the primary DNS server's IP address.

Secondary

Specify the secondary DNS server's IP address.

APIPA

-

Allocate the IP address from the link-local address range automatically. *1

IPv6

-

Enable or disable the IPv6 protocol.

WPS/Push Button

-

-

Configure your wireless network settings using the one-button push method.

WPS/PIN Code

-

-

Configure the wireless network settings using WPS with a PIN code.

WLAN Status

Status

-

Display the wireless Ethernet link status.

Signal

-

Display the signal condition.

SSID

-

Display the wireless SSID.

Comm. Mode

-

Display the current Communication mode.

MAC Address

-

-

Display the MAC address of the machine.

Set to Default

-

-

Restore wireless network settings of your machine to the factory settings.

WLAN Enable

-

-

Turn the wireless interface on or off.

Wi-Fi Direct  *2

Manual

-

-

Configure your Wi-Fi Direct network settings manually.

Group Owner

-

-

Set your machine as the Group Owner.

Push Button

-

-

Configure your Wi-Fi Direct network settings using the one-button push method quickly.

PIN Code

-

-

Configure your Wi-Fi Direct network settings using WPS with a PIN code quickly.

Device Information

Device Name

-

View your machine's device name.

SSID

-

Display the Group Owner's SSID.

IP Address

-

Display your machine's IP Address.

Status Information

Status

-

Display the Wi-Fi Direct network status.

Signal

-

Display the current Wi-Fi Direct network signal strength.

I/F Enable

-

-

Enable or disable the Wi-Fi Direct connection.

NFC

-

-

-

Turn the NFC function on or off.

IPsec

-

-

-

IPsec is an optional security feature of the IP protocol that provides authentication and encryption services. We recommend contacting your network administrator before changing this setting.

Network Reset

-

-

-

Restore all network settings of your machine to the factory settings.

Printer Settings

Print the Printer Settings page.

Network Configuration

Print the Network Configuration Report.

Print File List

Print a list of data saved in the memory.

Drum Dot Print

Print the Drum Dot Check Sheet.

WLAN Report

Print the wireless LAN connectivity diagnosis result.

Serial No.

-

Display the machine's serial number.

Firmware Version

Main Version

Check your machine's firmware version.

Security Version

Firmware Update

-

Update your machine to the latest firmware.

Firmware Auto Check

-

View firmware information on the Home screen.

Page Counter

Total

Display the total printed pages.

Colour

Display the total colour printed pages.

Black and White

Display the total monochrome printed pages.

Parts Life *1

Drum

Display the remaining life of the drum unit.

Belt

Display the remaining life of the belt unit.

Fuser

Display the remaining life of the fuser unit.

Laser

Display the remaining life of the laser unit.

PF Kit MP

Display the remaining life of the PF Kit MP.

PF Kit 1

Display the remaining life of the PF Kit 1.

PF Kit 2 *2

Display the remaining life of the PF Kit 2.

PF Kit 3 *2

Display the remaining life of the PF Kit 3.

PF Kit 4 *2

Display the remaining life of the PF Kit 4.

PF Kit 5 *2 *3

Display the remaining life of the PF Kit 5.

Reset

Machine Reset

Restore all the machine's settings that you have changed, such as Paper Type.

Network Reset

Restore all network settings of your machine to the factory settings.

Factory Reset

Reset the machine and restore the printer settings (including command settings) to the factory settings.

Local Language

-

Select the LCD language for your country.