Search

Site Map

Network Reset

Use the Network Reset function to restore the machine's network settings, such as password and IP address, back to the factory settings.
  • Unplug all the interface cables before you perform a Network Reset.

HL-L5210DN/HL-L5210DW/HL-L5215DN/HL-L6210DW

  1. Press image or image to select the following:
    1. Select [Initial Setup]. Press OK.
    2. Select [Reset]. Press OK.
    3. Select [Network Reset]. Press OK.
  2. Press image to select [Reset].
  3. Press image to restart the machine.

HL-L6410DN/HL-L6415DN

  1. Press image[Settings]>[All Settings]>[Initial Setup]>[Network Reset].
  2. Do one of the following:
    Option
    Description
    Press Yes for 2 seconds

    Reboot the machine. The machine will begin the reset.

    Press No

    The machine will exit without rebooting.

    image
    If you exit without rebooting, your machine will not reset and your settings will remain unchanged.
Related Information
Did you find the information you needed?

find moreaccept