Home > Machine Settings > Change Machine Settings from the Control Panel > Settings and Features Tables > Feature Tables (HL-L3288CDW)
Feature Tables (HL-L3288CDW)
[Toner]
[Toner]
Level 2 | Level 3 | Level 4 | Descriptions |
|---|---|---|---|
| Toner Life | - | View the approximate remaining toner life for each colour. |
Test Print | - | Print the test page. | |
Colour Correction | Correction Start | Perform colour calibration to check and correct colours, and then perform registration to align the print position of each colour. | |
Reset | Reset the calibration parameters to the default settings. | ||
Toner Cartridge Check | Black | View the installed toner cartridge information on the LCD, for example, if the toner cartridge is genuine. | |
Magenta | |||
Cyan | |||
Yellow |
Wi-Fi Setup
(Wi-Fi Setup)
Level 2 | Level 3 | Descriptions |
|---|---|---|
| Find Wi-Fi Network | Configure the wireless network settings using the setup wizard. |
TCP/IP *1 | Change the TCP/IP settings. | |
WPS/Push Button | Configure your wireless network settings using the one-button push method. | |
WPS/PIN Code *1 | Configure the wireless network settings using WPS with a PIN code. | |
WLAN Status *1 | Display the wireless network connection status. | |
MAC Address *1 | Display your machine's MAC address. | |
Set to Default *1 | Restore your machine's wireless network settings to the factory settings. | |
WLAN Enable *1 | Turn the wireless interface on or off. |
Available after a Wi-Fi® connection has been configured.
[Functions]
[Functions]
Level 2 | Level 3 | Descriptions |
|---|---|---|
| Apps | Connect the Brother machine to the Brother Apps service. |
[Secure Print]
[Secure Print]
Level 2 | Descriptions |
|---|---|
| You can print data saved in the machine's memory when you enter your four-digit password. Active only when the machine has secure print data. |