Search

Set Auto Power Off Mode

If the machine is in Deep Sleep Mode for certain length of time, based on your model and settings, the machine will go into Power Off Mode automatically. The machine does not go into Power Off Mode when the machine is connected to a network.
  • To start printing, press image on the control panel and then send a print job.

HL-L2402D

  1. Make sure that the front cover is closed and the power cord is plugged in.
  2. Press image to turn on the machine and make sure only the Ready LED lights up.
  3. Press Go four times to turn the function On or Off.

    All LEDs blink twice when Auto Power Off Mode is turned on.

    All LEDs blink once when Auto Power Off Mode is turned off.

HL-L2400DW/HL-L2400DWE/HL-L2442DW/HL-L2445DW/HL-L2447DW/HL-L2460DN/HL-L2865DW

image
Select how long the machine must be in Deep Sleep Mode before it goes into Auto Power Off Mode.

  1. Press image or image to select the following:
    1. Select [General Setup]. Press OK.
    2. Select [Ecology]. Press OK.
    3. Select [Auto Power Off]. Press OK.
  2. Press image or image to select the length of time (1, 2, 4, or 8 hours) that the machine should remain idle before entering Power Off Mode.
  3. Press Go.
Did you find the information you needed?