Home > Introduction to Your Machine > LED Patterns and Indications (for Models Without an LCD)
LED Patterns and Indications (for Models Without an LCD)
LED indications are defined in the table below.
| LED is off. |
| LED is on. |
| LED is dimmed. |
| LED is blinking. |
This table defines what LEDs indicate when they light up, dim, or blink.
LED indication | Status | Meaning |
---|
![]() | Sleep | In Sleep mode (Power Save mode), the machine acts as if it is turned off, but it can still receive data. Receiving a print job will wake the machine and it will start printing. |
![]() | Ready | The machine is ready to print. |
Data Remaining | There is remaining print data in the machine's memory. Press If the remaining data does not print, resend the print job. |
![]() | Please Wait | The machine is warming up. |
Printing | The machine is printing. |
Receiving Data | The machine is either receiving data from the computer or processing data in the memory. When in Receiving Data state, Ready LED ( |
Cooling Down | The machine is cooling down. Wait for 10 minutes or until the inside of the machine has cooled down. |
![]() | Cancel Printing | The machine is canceling the job. |