If a paper jam occurs, the printer will flash the Paper LED as shown below.
HOT SURFACE
| |
After you have just used the printer, some internal parts of the printer will be extremely hot. When you open the front cover or back cover of the printer, DO NOT touch the shaded parts shown in the illustrations.
|
Clear the jammed paper as follows.
If the jammed paper is removed completely by following the steps below, you can install the paper tray first, and then close the front cover. The printer will resume printing automatically.
If the printer does not start printing automatically, press Go. If the printer still does not start printing, check that all the remaining jammed paper has been removed from the printer. Then try printing again.
Note
| |
Always remove all paper from the paper tray and straighten the stack when you add new paper. This helps prevent multiple sheets of paper from feeding through the printer at one time and prevents paper jams.
|
| 1 |
Press the cover release button and then open the front cover.
|
| 2 |
Slowly take out the drum unit and toner cartridge assembly. The jammed paper will be pulled out with the drum unit and toner cartridge assembly.
 CAUTION
| |
To prevent damage to the printer caused by static electricity, DO NOT touch the electrodes shown in the illustration.
|
|
| 3 |
Pull the paper tray completely out of the printer.
|
| 4 |
Close the front cover.
|
