DIMM

For HL‑5240

The HL‑5240 printer has 16 MB of standard memory and one slot for optional memory expansion. You can expand the memory up to 528 MB by installing dual in-line memory modules (DIMMs).

For HL‑5250DN

The HL‑5250DN printer has 32 MB of standard memory and one slot for optional memory expansion. You can expand the memory up to 544 MB by installing dual in-line memory modules (DIMMs).

DIMM types

You can install the following DIMMs:

•	128 MB Buffalo Technology VN133-D128 / VN133-X128
•	256 MB Buffalo Technology VN133-D256
•	512 MB Buffalo Technology VN133-D512

•	64 MB TechWorks 12165-0004
•	128 MB TechWorks 12462-0001
•	256 MB TechWorks 12485-0001
•	512 MB TechWorks 12475-0001

Note

•	For more information, visit the Buffalo Techonology site at http://www.buffalotech.com.
•	For more information, visit the Techworks web site at http://www.techworks.com.

In general, the DIMM must have the following specifications:

Type: 144 pin and 64 bit output

CAS latency: 2

Clock frequency: 100 MHz or more

Capacity: 64, 128, 256 or 512 MB

Height: 31.75 mm (1.25 in.)

Dram Type: SDRAM 2 Bank

SDRAM can be used.

Note

•	There might be some DIMMs that will not work with the printer.
•	For more information, call the dealer you bought the printer from or Brother Customer Service.

Page Top