Default settings

The printer has three levels of default settings; the default settings have been set at its factory before shipment (see Menu table).

•	Network default settings
•	Factory reset
•	Settings reset

Note

•	You cannot modify the preset default settings.
•	Page counter can never be changed.

Network default settings

If you want to reset only the print server back to its default settings (by resetting all network information such as the password and IP address), follow these steps:

Press + or - to choose Network. Press OK.

Select

or OK

Network

Press + or - to choose Factory Reset. Press OK.

Factory Reset

Press OK again.

Restart Printer?

The printer will restart automatically.

Page Top

Factory Reset

You can partially reset the machine back to its default printer settings. The settings that will not be reset are the Interface, Local Language, Reprint, Set Registration, Setting Lock, Secure Function Lock 2.0 (HL-3070CW only) and the Network settings:

Press + or - to choose Reset Menu. Press OK.

Select

or OK

Reset Menu

Press + or - to choose Factory Reset. Press OK.

Factory Reset

Press OK again.

OK?

Page Top

Settings Reset

This operation will reset all the machine settings back to the settings that were set at the factory:

Disconnect the network cable from the printer; otherwise the network settings (such as IP address) will not be reset.

Press + or - to choose Reset Menu. Press OK.

Select

or OK

Reset Menu

Press + and Cancel at the same time.

Reset Printer

Press OK after the following message appears.

Settings Reset

Press OK again.

Reset Printer?

The printer will restart automatically.

Page Top