![]() ![]() | ![]() ![]() |
• | The BR-Script printer driver (PostScript® 3™ emulation) does not support manual duplex printing. |
• | If you are using the Macintosh Printer Driver, see Manual Duplex Printing. |
1 | In the printer driver choose the Basic tab, and choose the Manual Duplex printing mode from the Manual Duplex / Booklet setting, and then from the Basic tab choose the Paper Source to be Tray1. |
2 | Send the data to the printer, then click OK on the computer screen. The printer will automatically print all the even-numbered pages on one side of the paper first. ![]() |
3 | Remove the printed even-numbered pages from the output tray and then, in the same order1, put them back in the paper tray with the side to be printed on (blank side) face down. Follow the instructions on the computer screen. ![]() |
4 | The printer will now automatically print all the odd-numbered pages on the other side of the paper. |
1 | In the printer driver choose the Basic tab, and choose the Manual Duplex printing mode from the Manual Duplex / Booklet setting, and then from the Basic tab choose the Paper Source to be Manual. |
2 | Open the manual feed slot cover. ![]() |
3 | Using both hands, slide the manual feed slot paper guides to the width of the paper that you are going to use. ![]() |
4 | Using both hands put the paper in the manual feed slot with the side that is going to be printed on first facing up. Send the data to the printer, then follow the instructions on the computer screen. Repeat this step until you have printed all the even-numbered pages. |
5 | Remove the printed even-numbered pages from the output tray and then, in the same order1, put them back into the manual feed slot. Put the paper with the side to be printed on (the blank side) face up. Follow the instructions on the computer screen. ![]() |
![]() ![]() | ![]() ![]() |