Home PrintPrevious Next

For Macintosh® users

Improper Setup Improper Setup
 
DO NOT try to cancel any of the screens during this installation.
1
Turn on your Macintosh®.
2
Put the supplied CD-ROM into your CD-ROM drive. Double-click the HL2100 icon on your desktop. Double-click the Start Here icon. Choose your printer model and the language.
Screen
3
Click Install Printer Driver on the menu screen.
Screen
4
Click Wireless Network users.
Screen
5
Choose Driver Install Only, and then click Next. Follow the on-screen instructions. Then, restart your Macintosh®.
Screen
For Mac OS® X 10.2.4 to 10.2.8 users: Go to step 8.
For Mac OS® X 10.3 or greater users: Go to step 6.
6
The Brother software will search for the Brother printer. During this time the following screen will appear.
Screen
Note Note
• 
If more than one printer is available, the following list appears. Choose the printer you wish to connect, and then click OK.
Screen
• 
If there is more than one of the same printer model connected on your network, the Ethernet address (MAC address) will be displayed after the model name.
• 
You can find your printer’s Ethernet address (MAC address) by printing out the Printer Settings Page. See Printing the Printer Settings Page.
7
When this screen appears, click OK.
Screen
OK!
 
For Mac OS® X 10.3 or greater users:
Setup is now complete.
8
When this screen appears, click Add.
Screen
9
Make the following selection.
Screen
10
Choose your printer, and then click Add.
Screen
Note Note
• 
If there is more than one of the same printer model connected on your network, the Ethernet address (MAC address) will be displayed after the model name.
• 
You can find your printer’s Ethernet address (MAC address) by printing out the Printer Settings Page. See Printing the Printer Settings Page.
11
Click Print Center, then Quit Print Center.
Graphic
Screen
OK!
 
For Mac OS® X 10.2.4 to 10.2.8 users:
Setup is now complete.
Page Top
Home PrintPrevious Next