| | |
| 1 | Turn off the machine’s power switch. Unplug the telephone line cord. | ||
| 2 | Disconnect the interface cable from the machine, and then unplug the power cord from the AC power outlet. | ||
| 3 | Remove the DIMM covers (1 and 2).  | ||
| 4 | Unpack the DIMM and hold it by its edges.   CAUTION | ||
| 5 | Hold the DIMM by the edges and align the notches in the DIMM with the protrusions in the slot. Insert the DIMM diagonally (1), then tilt it toward the interface board until it clicks into place (2).  | ||
| 6 | Put the DIMM covers (2 and 1) back on.  | ||
| 7 | Plug the machine’s power cord back into the AC power outlet first, and then connect the interface cable. | ||
| 8 | Plug in the telephone line cord. Turn on the machine’s power switch.  Note
|
| | |