This machine has 128 MB of standard memory and one slot for optional memory expansion. You can expand the memory up to 640 MB by installing dual in-line memory modules (SO-DIMMs). When you add the optional memory, it increases the performance for both copy and print operations.
In general, the machine uses industry- standard SO-DIMM with the following specifications:
Type: 144 pin and 64 bit output
CAS latency: 2
Clock frequency: 100 MHz or more
Capacity: 64 MB, 128 MB, 256 MB or 512 MB
Height: 1.25 in. (31.75 mm)
Dram Type: SDRAM 2 Bank
You can install the following SO-DIMM: SDRAM SO-DIMM 144 pin
Capacity: 64 MB, 128 MB, 256 MB or 512 MB
Note
| • | There might be some SO-DIMMs that will not work with the machine. |
| • | For more information, call Brother Customer Service. |
