Home PrintPrevious Next

Tray use in fax mode

You can change the default tray that the machine will use for printing received faxes.
When you choose Tray#1 Only, MP Only or Tray#2 Only1, the machine loads the paper only from that tray. If the selected tray is out of paper, No Paper will appear on the LCD. Insert the paper in the empty tray.
When you choose T1>T21>MP, the machine takes paper from Tray #1 until it is empty, then from Tray #2, and then from the MP tray. When you choose MP>T1>T21, the machine takes paper from the MP tray until it is empty, then from Tray #1, and then from Tray #2.
Note Note
• 
You can use four sizes of paper for printing faxes: A4, Letter, Legal or Folio. When a suitable size is not in any of the trays received faxes will be stored in the machine’s memory and Check Paper Size will appear on the LCD. (For details, see Error and maintenance messages.)
• 
If the tray is out of paper and received faxes are in the machine’s memory, No Paper will appear on the LCD. Insert paper in the empty tray.
1
Press Menu, 1, 6, 2.
16.Tray Use
  2.Fax
Bsymbol.utri    MP>T1
Bsymbol.dtri    T1>MP
Select Bsymbol.utriBsymbol.dtri or OK
2
Press Bsymbol.utri or Bsymbol.dtri to choose Tray#1 Only, Tray#2 Only, MP Only, MP>T1>T21 or T1>T21>MP.
Press OK.
1
Tray#2 Only or T2 appears only if the optional tray is installed.
3
Press Stop/Exit.
Page Top
Home PrintPrevious Next