Home PrintPrevious Next

Tray use in copy mode

You can change the priority tray that the machine will use for printing copies.
When you choose Tray#1 Only, MP Only or Tray#2 Only1, the machine loads the paper only from that tray. If the selected tray is out of paper, No Paper will appear on the LCD. Insert the paper in the empty tray.
To change the tray setting follow the instructions below:
1
Press Menu, 1, 6, 1.
16.Tray Use
  1.Copy
Bsymbol.utri    MP>T1
Bsymbol.dtri    T1>MP
Select Bsymbol.utriBsymbol.dtri or OK
2
Press Bsymbol.utri or Bsymbol.dtri to choose Tray#1 Only, Tray#2 Only1, MP Only, MP>T1>T21 or T1>T21>MP.
Press OK.
1
Tray#2 Only or T2 appears only if the optional tray is installed.
3
Press Stop/Exit.
Note Note
• 
The ADF can detect the document size. When loading the documents from the ADF and MP>T1>T2 or T1>T2>MP is selected, the machine looks for the tray with the most suitable paper and pulls paper from that tray.
• 
When using the scanner glass, your document is copied from the higher priority tray even if more suitable paper is in another paper tray.
Page Top
Home PrintPrevious Next