When you choose Scan to OCR, your document will be scanned and sent directly to the Macintosh
® you designated on your network. ControlCenter2 will activate the OCR software installed on your Macintosh
® (Presto!
® PageManager
®) and convert your document into text for viewing and editing from a word processing application on the designated Macintosh
®. You can change the Scan configuration. (See
OCR (word processing application).)
| 1 | Put the document face up in the ADF, or face down on the scanner glass. |
| 2 | Press  ( Scan). |
| 3 | Press  or  to choose Scan to OCR. Press OK. If your machine is an MFC-9440CN or DCP-9040CN, go to Step 5. If your machine is an MFC-9840CDW, go to Step 4. |
| 4 | Press or to choose 1sided, 2sided (L)edge or 2sided (S)edge. Press OK.  Note | | If you want to scan a document using the duplex scanning feature, you need to put the document in the ADF and then choose 2sided (L)edge or 2sided (S)edge depending on your document layout. |
|
| 5 | Press or to choose the destination Macintosh ® you want to send to. Press OK. If the LCD prompts you to enter a Pin number, enter the 4-digit Pin number for the destination Macintosh® on the control panel. Press OK. |
| 6 |
Press Mono Start or Color Start.
The machine starts the scanning process. |
Note
| |
Scan type depends on the settings on the Device Button tab, Mono Start or Color Start do not change the settings. |
