1 | Put the document face up in the ADF, or face down on the scanner glass. | ||
2 | Press (Scan). | ||
3 | Press or to choose Scan to FTP. Press OK. If your machine is an MFC-9440CN, MFC-9450CDN, DCP-9040CN or DCP-9042CDN, go to Step 5. If your machine is an MFC-9840CDW or DCP-9045CDN, go to Step 4. | ||
4 | Press or to choose 1sided, 2sided (L)edge or 2sided (S)edge. Press OK. | ||
5 | Press or to choose <Manual>. Press OK. | ||
6 | Use the dial pad to enter the FTP host address (for example ftp.example.com’ Up to 60 characters) or the IP address (for example 192.23.56.189). Press OK. | ||
7 | Use the dial pad to enter the destination folder (for example /brother/abc/, up to 60 characters). Press OK. | ||
8 | Press or to choose Enter Username or Change Setting. Press OK. If you choose Enter Username, go to Step 12. If you choose Change Setting, go to Step 9. | ||
9 | Choose one of the options below. | ||
10 | |||
11 | Press or to choose PDF or TIFF. Press OK. | ||
12 | Use the dial pad to enter the username. Press OK. | ||
13 | Use the dial pad to enter the password. Press OK. | ||
14 | Do one of the following: | ||
15 | Press or to choose a file name you want to use and press OK. Press Black Start or Color Start and go to Step 17.
| ||
16 | Press or to choose <Manual>. Press OK. Enter the file name you want to use (up to 15 characters) and press OK. Press Black Start or Color Start. | ||
17 | The LCD shows Connecting. When the connection to the FTP server is successful the machine starts the scanning process. |