ScantoImage

Scan to Image

You can scan either a black and white or color document into your graphics application for viewing and editing. You can change the scan configuration. (See Image (example: Microsoft^® Paint).)

Put the document face up in the ADF, or face down on the scanner glass.

Press

(Scan).

Press

to choose Scan to Image.

Press OK.

If your machine is an MFC-9440CN, MFC-9450CDN, DCP-9040CN or DCP-9042CDN, go to Step 5.

If your machine is an MFC-9840CDW or DCP-9045CDN, go to Step 4.

Press

to choose 1sided, 2sided (L)edge or 2sided (S)edge.

Press OK.

Note

If you want to scan a document using the duplex scanning feature, you need to put the document in the ADF and then choose 2sided (L)edge or 2sided (S)edge depending on your document layout.

Press Black Start or Color Start.

The machine starts the scanning process.

Note

•	Scan type depends on the settings on the Device Button tab, Black Start or Color Start do not change the settings.
•	If you want the scanned data in color, choose color in scan type on the Device Button tab of the ControlCenter3 configuration. If you want the scanned data in black and white, choose black and white in scan type on the Device Button tab of the ControlCenter3 configuration. (See SCAN.)

Page Top