Memory Security lets you prevent unauthorized access to the machine.
While Memory Security is on, the following operations are available:
| • | Receiving faxes into memory (limited by memory capacity) |
| • | Fax Forwarding (if Fax Forwarding was already on) |
| • | Remote Retrieval (if Fax Storage was already on) |
While Memory Security is on, the following operations are NOT available:
| • | Printing received faxes |
Note
| • | To print the faxes in memory, turn off Memory Security. |
| • | |
Setting up the password
Note
| • | If you have already set the password, you will not need to set it, again. |
| • | If you forget the Memory Security password, please call your Brother dealer. |
| 1 | Press Menu, 1, 9, 1. Security  1.Mem Security |
|
| 2 | Enter a four-digit number for the password. Press OK. |
| 3 | Re-enter your password when the LCD shows Verify:. Press OK. |
| 4 | Press Stop/Exit. |
Changing your memory security password
| 1 | Press Menu, 1, 9, 1. Security 1.Mem Security |
|
| 2 | Press  or  to choose Set Password. Press OK. |
| 3 | Enter your four-digit password. Press OK. |
| 4 | Enter a four-digit number for the new password. Press OK. |
| 5 | Re-enter your new password when the LCD shows Verify:. Press OK. |
| 6 | Press Stop/Exit. |
Turning memory security on/off
If you enter the wrong password when following the instructions below, the LCD will show Wrong Password. Re-enter the correct password.
Turning memory security on
| 1 | Press Menu, 1, 9, 1. Security 1.Mem Security |
|
| 2 | Press or to choose Set Security. Press OK. |
| 3 | Enter the registered four-digit password. Press OK. The machine goes offline and the LCD shows Secure Mode. Note | | If there is a power failure faxes will remain in memory for up to 4 days. |
|
Turning memory security off
| 1 | Press Menu. Enter the registered four-digit password. Press OK. |
| 2 | Memory Security is automatically turned off and the LCD shows the date and time. Note | | If you enter the wrong password, the LCD shows Wrong Password and stays offline. The machine will stay in Secure Mode until the registered password is entered. |
|
