Setting Lock lets you set a password to stop other people from accidentally changing your machine settings.
Make a careful note of your password. If you forget it, please call your Brother dealer.
While Setting Lock is On, you cannot change the following settings without a password:
| • | Date/Time |
| • | Station ID |
| • | Quick-Dial settings |
| • | Mode Timer |
| • | Paper Type |
| • | Paper Size |
| • | Volume |
| • | Daylight Save |
| • | Ecology |
| • | Tray Use |
| • | LCD Contrast |
| • | Setting Lock |
| • | Memory Security |
Setting up the password
| 1 | Press Menu, 1, 9, 2. Security  2.Setting Lock |
|
| 2 | Enter a four-digit number for the password using numbers 0 - 9,  or #. Press OK. |
| 3 | Re-enter your password when the LCD shows Verify:. Press OK. |
| 4 | Press Stop/Exit. |
Changing your setting lock password
| 1 | Press Menu, 1, 9, 2. Security 2.Setting Lock |
|
| 2 | Press  or  to choose Set Password. Press OK. |
| 3 | Enter your four-digit password. Press OK. |
| 4 | Enter a four-digit number for the new password. Press OK. |
| 5 | Re-enter your new password when the LCD shows Verify:. Press OK. |
| 6 | Press Stop/Exit. |
Turning setting lock on/off
If you enter the wrong password when following the instructions below, the LCD will show Wrong Password. Re-enter the correct password.
Turning setting lock on
| 1 | Press Menu, 1, 9, 2. Security 2.Setting Lock |
|
| 2 | Press or to choose On. Press OK. |
| 3 | Enter your four-digit password. Press OK. |
| 4 | Press Stop/Exit. |
Turning setting lock off
| 1 | Press Menu, 1, 9, 2. Security 2.Setting Lock |
|
| 2 | Enter your four-digit password. Press OK twice. |
| 3 | Press Stop/Exit. |
