Print quality may vary according to the type of paper you are using.
You can use the following types of media: plain paper, labels or envelopes.
For best results, follow the steps below:
| • | Use paper made for plain paper copying. |
| • | Use paper that is 75 to 90 gsm. |
| • | Use labels which are designed for use in laser printers. |
| • | Avoid touching the printed surface of the paper immediately after printing. |
| • | Use long grain paper with a neutral Ph value, and a moisture content of approx 5%. |
CAUTION
| | DO NOT load envelopes, labels or thick paper (more than 105 gsm) into the paper tray or optional lower tray. It may cause paper jams. |
Type and size of paper
The machine loads paper from the installed standard paper tray, multi-purpose tray, or optional lower tray.
Standard paper tray
Since the standard paper tray is a universal type, you can use any of the paper sizes (one paper type and size at a time) listed in the table in
Paper capacity of the paper trays. The standard paper tray can hold up to 250 sheets of Letter/A4, legal and folio size paper (80 gsm). Paper can be loaded up to the maximum paper mark on the sliding paper width guide.
Multi-purpose tray (MP tray)
The MP tray can hold up to 50 sheets of paper (80 gsm) or up to 3 envelopes. Paper can be loaded up to the maximum paper mark on the sliding paper width guide.
Optional lower tray (LT-100CL)
The optional lower tray can hold up to
500 sheets of Letter/A4, legal and folio size paper (80 gsm). Paper can be loaded up to the top line of the maximum paper mark on the sliding paper width guide.
The names for the paper trays in the printer driver and this Guide are as follows:
Tray and optional unit | Name |
Standard paper tray | Tray 1 |
Optional lower tray | Tray 2 |
Multi-purpose tray | MP tray |
Paper capacity of the paper trays
| Paper size | Paper types | No. of sheets |
Paper Tray (Tray #1) | A4, Letter, Legal, Executive, A5, A6, B5, B6 and Folio 1 | Plain paper, Thin paper and Recycled paper | up to 250 (80 gsm) |
(MP tray) | Width: 69.9 to 215.9 mm (2.75 to 8.5 in.) Length: 116.0 to 406.4 mm (4.57 to 16.0 in.) | Plain paper, Thin paper, Thick paper, Recycled paper, Bond paper, Envelope and Labels | up to 50 (plain paper) (80 gsm) up to 3 (envelopes) |
Paper Tray (Tray #2) | A4, Letter, Legal, Executive, A5, B5, B6 and Folio 1 | Plain paper, Thin paper and Recycled paper | up to 500 (80 gsm) |
Recommended paper specifications
The following paper specifications are suitable for this machine.
Basis weight (gsm) | 75-90 |
Thickness (µm) | 80-110 |
Roughness (sec.) | Higher than 20 |
Stiffness (cm3/100) | 90-150 |
Grain direction | Long grain |
Volume resistivity (ohm) | 10e9-10e11 |
Surface resistivity (ohm-cm) | 10e9-10e12 |
Filler | CaCO3 (Neutral) |
Ash content (wt%) | Below 23 |
Brightness (%) | Higher than 80 |
Opacity (%) | Higher than 85 |
