Sometimes you may want to choose from several long distance carriers when you make a call. Rates may vary depending on the time and destination. To take advantage of low rates, you can store the access codes of long-distance carriers and credit card numbers as Speed Dial numbers. You can store these long dialling sequences by dividing them and setting them up as separate Speed Dial numbers in any combination. You can even include manual dialling using the dial pad. (See
Storing Speed Dial numbers.)
For example, you might have stored ‘555’ on Speed Dial: 03 and ‘7000’ on Speed Dial: 02. You can use them both to dial ‘555-7000’ if you press the following keys:
| 1 | Press Speed Dial. |
| 2 | Press #03. |
| 3 | Press Send a fax. |
| 4 | Press Speed Dial. |
| 5 | Press #02. |
| 6 | Do one of the following: | • | To make a telephone call, press Make a phone call. | | • | To send a fax, press Send a fax. Go to step 7. |
|
| 7 | Press Mono Start or Colour Start. You will dial ‘555-7000’. |
To temporarily change a number, you can substitute part of the number with manual dialling using the dial pad. For example, to change the number to 555-7001 you could press Speed Dial, choose #03, press Send a fax, and then press 7001 using the dial pad.
Note
| | If you must wait for another dial tone or signal at any point in the dialling sequence, create a pause in the number by pressing Redial/Pause. Each key press adds a 3.5-second delay. |
