Use the photo paper tray which is located on the top of the output paper tray to print on Photo (10 × 15 cm) and Photo L (89 × 127 mm) size paper. When you use the photo paper tray, you do not have to take out the paper that is in the tray beneath it. You can load maximum of 20 sheets of photo paper in the tray.
| 1 | Squeeze the blue photo tray release button (1) using your right index finger and thumb and push the photo tray forward until it clicks into the photo printing position (2). |
| 2 | Press and slide the paper side guides (1) and paper length guide (2) to fit the paper size. |
| 3 | Put the photo paper into the photo paper tray and gently adjust the paper side guides to the paper. Make sure the paper side guides touch the sides of the paper. Check that the paper is flat in the tray.  Note | • | Be careful that you do not push the paper in too far; it may lift at the back of the tray and cause feed problems. | | • | Always make sure that the paper is not curled or wrinkled. |
|
| 4 | When you have finished printing photos return the photo paper tray to the normal printing position. Squeeze the blue photo tray release button (1) using your right index finger and thumb and pull the photo tray back until it clicks (2). |
