Auto Crop

You can scan multiple documents placed on the scanner glass. An individual document can be previewed on the LCD before you save it. When you choose Auto Crop, the machine will scan each document and create separate files. For example, if you place three documents on the scanner glass, the machine will scan and create three separate files. If you want to create a three page file, choose PDF or TIFF for File Type. If you use this setting, use the scanner glass.
Graphic
1.
10 mm or greater (top, left, right)
2.
20 mm or greater (bottom)
Note Note
Auto Crop feature is supported by technology from Reallusion, Inc. Graphic
1
Make sure you have put a memory card or USB Flash memory drive in the correct slot.
2
Load your document.
3
Press Graphic (Scan).
4
Press Scan to Media.
5
Press Bsymbol.ltri or Bsymbol.rtri to choose Auto Crop.
6
Press Auto Crop.
7
Press On.
8
If you do not want to change additional settings, press Mono Start or Colour Start to start scanning.
9
The number of the scanned documents appears on the LCD.
Press OK.
10
Press Bsymbol.ltri or Bsymbol.rtri to preview each document data.
Press Save All to save the data.
Note Note
Auto Crop is available for paper that has all four corners with right angles of 90 degrees. If one of the angles is not square, Auto Crop cannot detect the document.
If your document is too long or wide, this setting does not work properly.
You must place the documents away from the edges of the scanner glass as shown in the illustration.
You must place the documents at least 10 mm apart from each other.
Auto Crop adjusts the skew of the document on the scanner glass, but if your document is skewed more than 10 degrees, this setting will not work.
The ADF must be empty to use the Auto Crop.
The Auto Crop feature is available for up to a maximum of 16 documents depending on size of your documents.
CAUTION IMPORTANT
DO NOT take out the memory card or USB Flash memory drive while Photo Capture is blinking to avoid damaging the card, USB Flash memory drive or data stored on them.