2 Loading documents and paper

Loading documents

You can send a fax, make copies, and scan (MFC-3360C only) from the ADF (automatic document feeder).

Using the ADF

The ADF can hold up to 20 pages and feeds each sheet individually. Use standard 20 lb (80 g/m²) paper and always fan the pages before putting them in the ADF.

Recommended environment

Temperature:	68 to 86° F (20 to 30° C)
Humidity:	50% to 70%
Paper:	20 lb LTR (80 g/m² A4)

Page Top

Document Sizes Supported

Length:	5 to14 in. (127 to 355.6 mm)
Width:	3.5 to 8.5 in. (89 to 215.9 mm)
Weight:	17 to 24 lb (64 to 90 g/m²)

Page Top

How to load documents

CAUTION

	DO NOT pull on the document while it is feeding.
	DO NOT use paper that is curled, wrinkled, folded, ripped, stapled, paper clipped, pasted or taped.
	DO NOT use cardboard, newspaper or fabric.

•	Make sure documents written with ink are completely dry.

1	Open the document support (1) and the document tray (2) and then pull out the extension (3).
2	Fan the pages well. Make sure you put the documents face down, top edge first in the ADF until you feel them touch the feed roller.
3	Adjust the paper guides (1) to fit the width of your documents.

Page Top