You can set your own default settings for Quality, File Type and File Name.
Setting the new default
1 | Press the ![Graphic](images/p_key_scan.gif) ( Scan) key. |
2 | Press ![Bsymbol.utri](../img/bsymbol_utri.gif) or ![Bsymbol.dtri](../img/bsymbol_dtri.gif) to choose Scan to FTP. Press OK. |
3 | Press ![Bsymbol.utri](../img/bsymbol_utri.gif) or ![Bsymbol.dtri](../img/bsymbol_dtri.gif) to choose <Manual>. Press OK. ![Note](../img/icon_note.gif) Note | If there is no FTP Profile configured, skip 3 and go to 4. |
|
4 | Enter the FTP host address (for example ftp.example.com up to 60 characters) or the IP address (for example 192.23.56.189). Press OK. |
5 | Enter the destination folder (for example /brother/abc/, up to 60 characters). Press OK. |
6 | Enter the username. Press OK. |
7 | Enter the password. Press OK. |
8 | Press and choose your new setting. Repeat this step for each setting you want to change. |
9 | After changing the last setting, press ![Bsymbol.utri](../img/bsymbol_utri.gif) or ![Bsymbol.dtri](../img/bsymbol_dtri.gif) to choose Set New Default. Press OK. |
10 | Press 1 to choose Yes. |
11 | Press Stop/Exit. |
Factory reset
You can reset Quality, File Type and File Name to the factory settings.
1 | Press the ![Graphic](images/p_key_scan.gif) ( Scan) key. |
2 | Press ![Bsymbol.utri](../img/bsymbol_utri.gif) or ![Bsymbol.dtri](../img/bsymbol_dtri.gif) to choose Scan to FTP. Press OK. |
3 | Press ![Bsymbol.utri](../img/bsymbol_utri.gif) or ![Bsymbol.dtri](../img/bsymbol_dtri.gif) to choose <Manual>. Press OK. ![Note](../img/icon_note.gif) Note | If there is no FTP Profile configured, skip 3 and go to 4. |
|
4 | Enter the FTP host address (for example ftp.example.com up to 60 characters) or the IP address (for example 192.23.56.189). Press OK. |
5 | Enter the destination folder (for example /brother/abc/, up to 60 characters). Press OK. |
6 | Enter the username. Press OK. |
7 | Enter the password. Press OK. |
8 | Press ![Bsymbol.utri](../img/bsymbol_utri.gif) or ![Bsymbol.dtri](../img/bsymbol_dtri.gif) to choose Factory Reset. Press OK. |
9 | Press 1 to choose Yes. |
10 | Press Stop/Exit. |