Memory Receive (Monochrome only)

You can only use one Memory Receive operation at a time:

•	Fax Forwarding
•	Fax Storage
•	PC Fax Receive
•	Off

You can change your selection at any time. If received faxes are still in the machine’s memory when you change the Memory Receive operations, a message will appear on the LCD. (See Changing Memory Receive Operations.)

Note

When you receive a colour fax, the machine will treat the data as a colour or monochrome fax depending on the Receive Priority setting. (See Setting Receiving Priority.)

Fax Forwarding

When you choose Fax Forward, your machine stores the received fax in the memory. The machine will then dial the fax number you have programmed and forward the fax message.

Press Menu.

Press

to choose Fax.

Press OK.

Press

to choose Setup Receive.

Press OK.

Press

to choose Memory Receive.

Press OK.

Press

to choose Fax Forward.

Press OK.

Enter the forwarding number (up to 20 digits).

Press OK.

Press

to choose Backup Print:On or Backup Print:Off.

Press OK.

Note

•	If you choose Backup Print:On, the machine will also print the fax at your machine so you will have a copy. This is a safety feature in case there is a power failure before the fax is forwarded or a problem at the receiving machine. This Backup Print:On feature will not work if Fax Preview is on.
•	The machine can store faxes approximately 24 hours if there is a power failure.

Press Stop/Exit.

Page Top