The N in 1 copy feature can help you save paper by letting you copy two or four pages onto one printed page.
(MFC-6490CW) The 1 to 2 feature copies one A3 or Ledger size page onto two A4 or Letter size pages. If you use this setting, use the scanner glass.
You can also produce a poster. When you use the poster feature your machine divides your document into sections, then enlarges the sections so you can assemble them into a poster. If you want to print a poster, use the scanner glass.
Important
| • | Make sure paper size is set to Letter, Ledger, A4 or A3. |
| • | You cannot use the Enlarge/Reduce setting with the N in 1 and Poster features. |
| • | If you are producing multiple colour copies, N in 1 copy is not available. |
| • | (P) means Portrait and (L) means Landscape. |
| • | You can only make one poster copy and 1 to 2 copy at a time. |
Note
| • | Watermark Copy, Book Copy, Sort, Enlarge/Reduce and Skew Adjustment are not available with Page Layout. |
| • | (MFC-5890CN and MFC-5895CW)
4 in 1 and Poster (3 × 3) are not available if you are using A3 or Ledger size paper. |
| 1 | Press  ( Copy). |
| 2 | Load your document. |
| 3 | Enter the number of copies you want. |
| 4 | Press  or  to choose Page Layout. |
| 5 | (MFC-5890CN and MFC-5895CW) Press  or  to choose Off(1 in 1), 2 in 1 (P), 2 in 1 (L), 4 in 1 (P), 4 in 1 (L), Poster(2 x 2) or Poster(3 x 3). Press OK. (MFC-6490CW) Press or to choose Off(1 in 1), 2 in 1 (P), 2 in 1 (L), 4 in 1 (P), 4 in 1 (L), 1 to 2, Poster(2 x 2) or Poster(3 x 3). Press OK. If you chose 2 in 1 or Poster(2 x 2) with A3 or Ledger, go to step 6 to choose the paper size of your document. If you choose another setting, go to step 7. |
| 6 | (MFC-6490CW) Do one of the following: | • | If you chose 2 in 1 (P) or 2 in 1 (L), press or to choose Layout Format. Press or to choose LGRx2  LGRx1, LTRx2 LGRx1, A3x2 A3x1 or A4x2 A3x1. | | • | If you chose Poster(2 x 2), press or to choose Layout Format. Press or to choose LGRx1 LGRx4, LTRx1 LGRx4, A3x1 A3x4 or A4x1 A3x4. |
|
| 7 | If you do not want to change additional settings, press Mono Start or Colour Start to scan the page. If you placed the document in the ADF or are making a poster, the machine scans the pages and starts printing. If you are using the scanner glass, go to step 8. |
| 8 | After the machine scans the page, press 1 to scan the next page. |
| 9 | Place the next page on the scanner glass. Press OK. Repeat steps 8 and 9 for each page of the layout. |
| 10 | After all the pages have been scanned, press 2 to finish. |
If you are copying from the ADF, insert the document face up in the direction shown below:
| • | 2 in 1 (P) |
| • | 2 in 1 (L) |
| • | 4 in 1 (P) |
| • | 4 in 1 (L) |
If you are copying from the scanner glass, place the document face down in the direction shown below:
| • | 2 in 1 (P) |
| • | 2 in 1 (L) |
| • | 1 to 2 (MFC-6490CW) |
| • | 4 in 1 (P) |
| • | 4 in 1 (L) |
| • | Poster (2 x 2) You can make a poster size copy of a photograph. |
| • | Poster (3 x 3) You can make a poster size copy of a photograph. |
