Home PrintPrevious Next

Checking the print alignment

You may need to adjust the print alignment after transporting the machine, if your printed text becomes blurred or images become faded.
1
Press Ink Management.
2
Press Bsymbol.utri or Bsymbol.dtri to choose Test Print.
Press OK.
3
Press Bsymbol.utri or Bsymbol.dtri to choose Alignment.
Press OK.
4
Press Mono Start or Colour Start.
The machine starts printing the Alignment Check Sheet.
5
Check the 600 dpi and 1200 dpi test prints to see if number 5 most closely matches number 0.
6
Do one of the following:
•
If the number 5 samples of both the 600 dpi and 1200 dpi test prints are the best matches, press 1 (Yes) to finish the Alignment Check and go to step 9.
•
If another test print number is a better match for either 600 dpi or 1200 dpi, press 2 (No) to choose it.
7
For 600 dpi, press the number of the test print that most closely matches the number 0 sample (1-8).
8
For 1200 dpi, press the number of the test print that most closely matches the number 0 sample (1-8).
9
Press Stop/Exit.
Page Top
Home PrintPrevious Next