1 | Write down the wireless network settings of your access point or wireless router. |
2 | Turn on the machine by plugging in the power cord. |
3 | Press Menu. |
4 | Press or to choose Network. Press OK. |
5 | Press or to choose WLAN. Press OK. |
6 | Press or to choose Setup Wizard. Press OK. |
7 | The machine will search for your network and display a list of available SSIDs. You should see the SSID you wrote down earlier. If the machine finds more than one network use or key to choose your network, then press OK. Go to 11. If your access point is set to not broadcast the SSID, you will have to manually add the SSID name. Go to 8. |
8 | Choose <New SSID> using or . Press OK. Go to 9. |
9 | Enter the SSID name. (For information how to type text, see Entering Text.) Press OK. Go to 10. |
10 | Using or , choose Infrastructure when instructed. Press OK. Go to 11. If you chose Ad-hoc, go to 12. |
11 | Choose the Authentication method using or , and press OK. If you chose Open System, go to 12. If you chose Shared Key, go to 13. If you chose WPA/WPA2-PSK, go to 16. |
12 | Choose the Encryption type None or WEP using or , and press OK. If you chose None, go to 18. If you chose WEP, go to 13. |
13 | Choose the key option KEY1, KEY2, KEY3, KEY4 using or , and press OK. If you chose the key which shows **********, go to 14. If you chose a blank key, go to 15. |
14 | |
15 | |
16 | |
17 | |
18 | To apply the settings, choose Yes. To cancel, choose No. If you chose Yes, go to 19. If you chose No, go back to 7. |
19 | The machine starts to connect to the wireless device you have chosen. |
20 | If your wireless device is connected successfully, the display shows Connected for 60 seconds and configuration is completed. If the connection failed, the display shows Connection Failed for 60 seconds. (See Wireless network troubleshooting.) |
21 | Press OK. |
1 | Write down the wireless network settings of your access point or wireless router. | ||||
2 | Turn on the machine by plugging in the power cord. | ||||
3 | Press MENU. | ||||
4 | Press Network. | ||||
5 | Press WLAN. | ||||
6 | Press Setup Wizard. | ||||
7 | The machine will search for your network and display a list of available SSIDs. You should see the SSID you wrote down earlier. If the machine finds more than one network use or key to choose your network. Go to 11. If your access point is set to not broadcast the SSID, you will have to manually add the SSID name. Go to 8. | ||||
8 | Choose <New SSID> using or . Go to 9. | ||||
9 | Enter the SSID name. (For information how to type text, see Entering Text.) Go to 10. | ||||
10 | Press Infrastructure when instructed. Go to 11. If you chose Ad-hoc, go to 12. | ||||
11 | Choose and press the Authentication method. If you chose Open System, go to 12. If you chose Shared Key, go to 13. If you chose WPA/WPA2-PSK, go to 16. | ||||
12 | Choose and press the Encryption type None or WEP. If you chose None, go to 18. If you chose WEP, go to 13. | ||||
13 | Choose and press the key option KEY1:, KEY2:, KEY3:, KEY4:. If you chose the key which shows **********, go to 14. If you chose a blank key, go to 15. | ||||
14 | |||||
15 | |||||
16 | |||||
17 | |||||
18 | To apply the settings, press Yes. To cancel, press No. If you chose Yes, go to 19. If you chose No, go back to 7. | ||||
19 | The machine starts to connect to the wireless device you have chosen. | ||||
20 | If your wireless device is connected successfully, the display shows Connected for 60 seconds and configuration is completed. If the connection failed, the display shows Connection Failed for 60 seconds. (See Wireless network troubleshooting.) | ||||
21 | Press .
|