Home PrintPrevious Next

Type and size of paper

The machine loads paper from the installed standard paper tray or manual feed slot.

Standard paper tray

Since the standard paper tray is a universal type, you can use any of the paper sizes (one paper type and size at a time) listed in the table in Paper capacity of the paper trays. The standard paper tray can hold up to 250 sheets of A4/Letter, Legal or Folio size paper (80 g/m2). Paper can be loaded up to the maximum paper mark on the sliding paper width guide.
Page Top

Manual feed slot

The manual feed slot can hold a sheet with a size of 76.2 to 220 mm wide and 116 to 406.4 mm long. You can use the manual feed slot if you are using special paper, envelopes or labels.
Page Top

The name for the paper trays in the printer driver in this Guide are as follows:

Tray and slot
Name
Standard paper tray
Tray
Manual feed slot
Manual Feed
Page Top

Paper capacity of the paper trays

Paper size
Paper types
No. of sheets
Paper Tray
A4, Letter, Legal, Executive, A5, A5 (Long Edge), A6, B5 (ISO), B6 (ISO) and Folio1.
Plain paper, Thin paper and Recycled paper
up to 250 [80 g/m2]
Manual feed slot
(Manual Feed)
Width: 76.2 to 220 mm
Length: 116 to 406.4 mm
Plain paper, Thin paper, Thick paper, Thicker paper, Bond paper, Recycled paper, Envelopes and Labels.
1 sheet [80 g/m2]
1 Envelope
1
Folio size is 215.9 mm x 330.2 mm.
Page Top

Recommended paper specifications

The following paper specifications are suitable for this machine.
Basis weight
75-90 g/m2
Thickness
80-110 µm
Roughness
Higher than 20 sec.
Stiffness
90-150 cm3/100
Grain direction
Long grain
Volume resistivity
10e9-10e11 ohm
Surface resistivity
10e9-10e12 ohm-cm
Filler
CaCO3 (Neutral)
Ash content
Below 23 wt%
Brightness
Higher than 80%
Opacity
Higher than 85%
Page Top
Home PrintPrevious Next