Home PrintPrevious Next

Type and size of paper

The machine loads paper from the installed standard paper tray, or multi-purpose tray, or optional lower tray.

Standard paper tray

Since the standard paper tray is a universal type, you can use any of the paper sizes (one paper type and size at a time) listed in the table in Paper capacity of the paper trays. The standard paper tray can hold up to 250 sheets of Letter/A4, legal and folio size paper (20 lb or 80 g/m2). Paper can be loaded up to the maximum paper mark on the sliding paper width guide.
Page Top

Multi-purpose tray (MP tray)

The MP tray can hold up to 50 sheets of paper (20 lb or 80 g/m2) or up to 3 envelopes. Paper can be loaded up to the maximum paper mark on the sliding paper width guide.
Page Top

Optional lower tray (LT-100CL)

The optional lower tray can hold up to 500 sheets of Letter/A4, legal and folio size paper (20 lb or 80 g/m2). Paper can be loaded up to the top line of the maximum paper mark on the sliding paper width guide.
Page Top

The names for the paper trays in the printer driver and this Guide are as follows:

Tray and optional unit
Name
Standard paper tray
Tray 1
Optional lower tray
Tray 2
Multi-purpose tray
MP tray
Page Top

Paper capacity of the paper trays

 
Paper size
Paper types
No. of sheets
Paper Tray
(Tray #1)
A4, Letter, Legal, Executive, A5, A6, B5, B6 and Folio1
Plain paper, Thin paper and Recycled paper
up to 250 [20 lb (80 g/m2)]
Multi-purpose tray
(MP tray)
Width: 2.75 to 8.5 in. (69.9 to 215.9 mm)
Length: 4.57 to 16.0 in. (116.0 to 406.4 mm)
Plain paper, Thin paper, Thick paper, Recycled paper, Bond paper, Envelope and Labels
up to 50 (plain paper) [20 lb (80 g/m2)]
up to 3 (envelopes)
Paper Tray
(Tray #2)
A4, Letter, Legal, Executive, A5, B5, B6 and Folio1
Plain paper, Thin paper and Recycled paper
up to 500 [20 lb (80 g/m2)]
1
Folio size is 8 in. x 13 in.
Page Top

Recommended paper specifications

The following paper specifications are suitable for this machine.
Basis weight (lb (g/m2))
20-24 (75-90)
Thickness (µm)
80-110
Roughness (sec.)
Higher than 20
Stiffness (cm3/100)
90-150
Grain direction
Long grain
Volume resistivity (ohm)
10e9-10e11
Surface resistivity (ohm-cm)
10e9-10e12
Filler
CaCO3 (Neutral)
Ash content (wt%)
Below 23
Brightness (%)
Higher than 80
Opacity (%)
Higher than 85
Page Top
Home PrintPrevious Next